Click For Crochet Abbreviations List
SARAFAN WITH TIGRENCOM
It can be connected by car "Severyanka" (or manually, using savvy).
For the 34-36-th model, 300 g of fine gray yarn, connected in 3 strands, will be required.
For finishing - a little orange, white, brown, red and pink yarn of the same thickness.
The density of knitting is 28 loops per 10 cm horizontally and 45 rows per 10 cm vertically.
Back. Type an auxiliary thread 192 loops. Tie the hem of the 12-14 rows and then knit up to the 144th row (taking into account the height of the fold). Spray several rows of auxiliary thread and remove the canvas from the machine's needles. Then, again, put the associated back part on the machine's needles, while simultaneously cutting down 82 loops, that is, put on 82 times per 1 needle 2 loops and 28 times one needle one loop at regular intervals. Translate the density regulator 1-2 digits towards the density decrease (tighter) and tie 4 cm (18 rows) to the height, the gums on the waist line. Carry out an elastic band 1x1, lowering and lifting one loop. Set the density regulator to the calculated one and knit another 11 cm (50 rows) before the beginning of the armhole. Close the hinges of the lower part of the armhole on the right side of the machine in the following order: 4 n, 3 n, 2 n, 1 n, and on the left side of the machine - 20 loops - the area that goes to the front of the sarafan, and then close 4 n, 3 n, 2 n, 1. n. Next, knit until the opening of the neck opening is 11 cm (50 rows). Divide the hinges into 2 parts. Put on the left side 55 needles in the PNP and knit 15 loops of the right strap to the height of 4 cm (18 rows). Close the hinges. Put the 55 needles on the left in the RP, close 40 loops and knit the left shoulder strap to a height of 4 cm (18 rows). Close the hinges.
On the skirt in the front (approximately in the middle), follow the diagram of a drawing of a tiger cub. Knit from several tangles in sequence, so that there are no strings of threads along the wrong side of the knitted fabric. In the junction of threads of different colors, change them in places so that the connection is tight. Each cell of the circuit in height and width corresponds to one loop of the knitted fabric.
Before. Type the hinges on the needle 174 with an auxiliary thread. Then connect the main thread of the 12-14 rows and continue to knit up to the 144th row (before the gum starts). Spray several rows with an auxiliary thread and remove the knitted fabric. Again, put the hinges of the main blade on the machine's needles, while simultaneously cutting down 84 loops, ie, put 2 loops on one needle and 6 times one loop at a time on one needle at regular intervals. Make an elastic 1x1, as on the back. Tie another 50 rows to the armhole. Close the hinges on both sides of the fabric along the bottom of the armhole in the following order: 4 n, 3 n, 2 n, 1 n. Then knit another 28 rows before the beginning of the throat opening. Put on the left side of the machine 55 needles in the PNP and knit 15 stitch loops for a height of 40 rows. Close the hinges. Put 55 needles in the RP, close the 40 throat loops and then perform the left strap as the right one. After ironing the parts and the back, sew them along the shoulder and left side. On the right side, bend the back part to the front side and attach it to the right side of the gear part. Close the loops along the bottom line of the sarafan with a seam and sew a hem.
To trim the edge of the neck, armhole, bent vertical part of the back, tie strips. To knit strips, type the loops with an auxiliary thread, then tie the 6 rows with the main thread. To form openwork holes, re-insert the loops from each even needle to an odd one. Loose needles put in the RP and tie 2 rows of orange yarn (line of folding the strip), then knit another 6 rows of the main thread. Finish knitting with an auxiliary thread. After ironing, sew the strips to the product with a seam, first with the front seam, and then from the wrong side.
To knit the pocket, type 34 loops, bind 12-14 rows, then perform the folding line with orange threads the same as on the finishing strips. Spray another 12-14 rows and form a double edge. Next, knit 10 rows of a flat part and then reduce on both sides 10 times one loop through every 3 rows. Attach the pocket to the gear part. On the sewing line of the pocket, sew a crocheted cord to seal the seam.
Author of L. Ogurtsov's model
Source