– Needle, scissors, filler, 2 beads for eyes, sticky tape "Velcro" About 50 cm, wire bead about 20 cm.
Legend:
No-scale column
D – add
Outer Circle (2 pieces) of brown color
1.6 in CA
2.6 d = 12 SBN
3. (1 SBN, 1 d) x 6 = 18 SBN
4. (2 SBN, 1 d) x 6 = 24 GB
5. (3 SBN, 1 d) x 6 = 30 SBN
6. (4 SBN, 1 d) x 6 = 36
7. (5 SBN, 1 d) x 6 = 42
8. (6 SBN, 1 d) x 6 = 48
9. (7 SBN, 1 d) x 6 = 54
10. (8 SBN, 1 d) x 6 = 60 SBN
11. (9 SBN, 1 d) x 6 = 66
12. (10 SBN, 1 d) x 6 = 72
13. (11 SBN, 1 d) x 6 = 78
14. (12 SBN, 1 d) x 6 = 84
15. (13 SBN, 1 d) x 6 = 90 SBN
16. (14 SBN, 1 d) x 6 = 96
17. (15 SBN, 1 d) x 6 = 102
Change to white thread.
18-22 102 PRs
Sketch a spiral pattern.
Pave with a white thread spiral shell (see photo).
Inner circle (1 pc) is green.
1.8 in Ka
2.8 d = 16 SBN
3. (1 SBN, 1 d) x 8 = 24 SBN
4. (2 SBN, 1 d) x 8 = 32
5. (3 SBN, 1 d) x 8 = 40 SBN
6. (4 SBN, 1 d) x 8 = 48
7. (5 SBN, 1 d) x 8 = 56
8. (6 SBN, 1 d) x 8 = 64
9. (7 SBN, 1 d) x 8 = 72
10. (8 SBN, 1 d) x 8 = 80 SBN
11. (9 SBN, 1 d) x 8 = 88
12. (10 SBN, 1 d) x 8 = 96
13. Behind the front wall of the Loop 96
14 – 20 = 96
Cut the thread, fasten it.
Back to the 13th row.
For the remaining half loops knit 96
Also 14 – 20 = 96.
Cut the thread, fasten it.
Sew the sticky tape on the brown circles and green as shown in the photo.
The body strip. Green
60 VP
1. In the 2nd from the hook Loop 58, 3 in 1, 57, 0, d = 120 SBN
2.1 D, 57, 3 PR, 57, 2 PR = 126
3.1 D, 57, 0, 1 D, 1 SBN) x 3, 57, 1, (1 PR, 1SBN) x 2, 1SBN = 132
4.1 d, 2 SBN, 57 PCs, (1 PR, 2 SBN) x 3, 57 PCs, (1 PR, 2SBB) x 2 = 138
5.1 D, 3 SBN, 57, 0, (1 D, 3 SBN) x 3, 57, 0, (1 Ave, 3sb)x 2 = 144
6.1 D, 4 SBN, 57, 0, (1 D, 4 SBN) x 3, 57, (1 D, 4sb)x 2 = 150 SBN
7.1 D, 5 SBN, 57, 0, (1 Ave, 5 SBN) x 3, 57, 0, (1 Ave, 5SBB) x 2 = 156
8.13 SBN, 124 PR, 20 SBN = 280 in.
Eyes (2 pcs) of green color
1.6 in CA
2.6 d = 12 SBN
3. The 12th
Add a little filler.
4.6 UB = 6
Thread fasten, trim, leave a little for further work.
The wire is to be sold at the end of the tape. Fasten as shown in the photo.
Slightly sew the body from below. Add a little filler.
Put small balls on the ends of the wire. With the help of glue to wrap a thread on a wire.
Sew the eye beads.
Sew the circles to the body strip as shown in the photo.
Your snail is ready.