Anna

Step-by-Step Baby Booties Tutorial

Click For Crochet Abbreviations List

This booty will be beautiful on your baby

Let's start:

Materials and tools:
For knitting the upper part of the shoe, yarn type SOSO (Vita Cotton), 100% mercerized
cotton, 240m / 50g, your chosen color or Alize Forever, 100% microfiber-acrylic, 300m / 50g. For
The soles of the soles are suitable for the yarn SOSO (Vita Cotton) or YarnArt BEGONIA, 169m for 50g, 2 buttons or beads.
For yarn SOSO and BEGONIA - hook 1.25mm
For Forever - hook 1.5mm.
Approximate dimensions of the sole:
length - 53mm,
width of the widest part (measured through the base of the 5-and CCH from one loop) - 27 - 28mm,
width in the heel area (measured through the beginning of the first row) - 20 - 21mm.
Abbreviations:
P. - loop V.p. - air loop
V.p.p. - air lifting loop
RLS - column without crochet
ПССН - полустолбик with накидом
SSN - column with crochet
SS - connecting post
Prev - previous / previous
Track. - next / next
The slave. - working

Insole. (2 pieces, we knit in circular rows).
1 row: Gather the thread of the finishing color you selected 12v.p., RLS in the 2 nd n. From the hook, RLS in the next. 9th century,
5 RLS in the next, RLS in the next. 9n. on the back of the dial chain, 4 RLS in the next, SS under the ditch of the 1st
RLS. (28 p.)
2 ranks: VPP, (not a RLS), RLS in the next. 4p., Starting with the first, 4 PRSP after. 4n SSN in the 2n to 2CN trace
in the next. 5n., CCN in the trace of 2p., 4 PRSP in the trace of 4p., SSN in the next. 4p., 2 SPS in the next. 3p., SS to the top of the 1st RLS.
(36 points)
3rd row: 2в.п.п. (are PRSPs), PRSPs following 9p., 2 PRSPs in the next, PSSN in the next, 2 PRSPs in the next. etc., the PRSP in
track. p., 2 PSSN on the next page. 2p., ПССН in the next., 2 ПССН in the next, ПССН in the next, 2 ПССН in the next, ПССН in the trace
10п., 2 ПССН in the next, ПССН in the next, on 2 ПССН in the next. 2p., ПССН in the next, 2 ПССН in the next, СС in the 2-nd VPP,
pull the end of the thread cm 8, cut the thread. Using a hook or a needle, stretch the end of the thread under
top of the 2nd PRSP before. series. (46 items)





In the tighter point, from which the thread came out, we wind it through the back floor, from the center to the outside,










Thread the crochet of a smaller size or using a needle. We knit one more insole with the same color of the thread (in the photo - the sole, the insole is white in color). Sole, 2 pcs., We knit as described above with a yarn of the main color.







We connect the insole with the sole. Combine the insole with the bottom of the backs to each other, connect them with a tie seam floss of the color of the sole, introducing a hook between the SSDs of the last rows of the insole and the sole. At the end cut and fasten the thread, (stretch the thread to the side of the sole between the loops, as shown in the photo).




We knit the upper part of the shoe Determine the middle of the toe and heel, laying a needle or a hook along the set, put the markers from strings or pins. (but not plastic markers!) We specify the number of loops by counting: between the markers they should be 23n. From the middle of the toe, we count on both sides by 5n., Put markers - strings, (if you have lost one loop, it happens, it's okay - do it one central point, and count 4n from it. round trip. ) Right shoe. We begin to knit from the inside of the right side of the right shoe, from the toe. We shall be fastened to loops tambour seam. We take the yarn of the primary color, we introduce a hook under the front half of the loop of the 6th st point from the center or next. after the marker, etc., grab the slave. thread, stretch it and tie it, * insert a hook under track. the front half of the loop, stretch the thread, tie the SBN * - repeat between * ... * 11 more times; we change the thread of the main color to the thread of the finish color: by sewing the 13th RLS, we draw from the front floor hinges slave. thread, (leave the work thread before work), grab the finishing thread, we sew the 2nd point on hook, * we introduce a hook under the trace. the front half of the loop, pull out the thread, tie the RLS * - repeat between * ... * 13 times, cpp, knit turn against the hour. arrows. 2 ranks: we knit 13 sci in the next. RLS before. series, beginning with the first (the initial end of the finishing thread we are tying in this row of RLS); tie the 13th RLS, change the thread, as described above, making "Cross" of two colors of threads, (make sure that the thread always remains on the wrong side of the shoe!) , we knit 13 Tsc in the next. RLS before the series, (the initial end of the main thread is typed into this row of RLS), vpp, knitting turn. 3 - 6 rows - we knit as the 2nd row.




7 series: finished the series with a floss of the main color, made an apt, knitting turned; we knit the RLS in the trace. 6n. before. series, vpp, knitting turn. 8 row: we knit the RLS in the trace. 6n. before. series, starting with the first, ppp, knitting turn. 9 row: we knit the RLS in the next. 6n. before. series, starting with the first, pp. - not to do, only in even numbers !, knitting turn. 10 row: skip the first RPS before. row, we knit the RLS in the footprint. 5n. before. series, vpp, knitting turn. 11 series: we knit the RLS in the trace. 5n. before. row, knitting turn. 12 row: skip the first RPS before. row, we knit the RLS in the footprint. 4n. before. series, vpp, knitting turn. 13 row: we knit the RLS in the next. 4n. before. row, knitting turn. 14 row: skip the first RPS before. row, we knit the RLS in the footprint. 3n. before. series, vpp, knitting turn. 15 row: we knit the RLS in the next. 3n. before. row, knitting turn. 16 row: skip the first RPS before. row, we knit the RLS in the footprint. 2n. before. row, knitting turn. 17 series: we knit 2 RLS with a common vertex: we introduce a hook in the first point of the previous stage. series, grab and draw thread - on the hook 2 nd, we introduce the hook in the next steps. before. row, grab and pull the thread - on the hook 3-u etc., we sew them at a time, pull out the small end of the thread so that we can hide it, using needle, cut off, hide the "tail".




shoe. We begin to knit from the front inner side of the left shoe, from the toe. We shall be fastened to loops tambour seam. We take the yarn of the primary color, we introduce the hook under the back floor of the loop of the 6th st point from the center or track. after the marker, etc., grab the slave. thread, stretch it and tie it, * introduce a hook under the track. the back of the floor loop, pull the thread, tie the SBN * - repeat between * ... * 11 more times; change the thread the main color for the color finish thread: by sewing the 13th RLS, we pull out the slave from the back floor of the loop. a thread, (we leave the slave thread at work), grab the finishing thread, tie the second stitch on the hook, * enter the hook under the track. the back of the floor loop, stretch the thread, tie the SBN * - repeat between * ... * 13 times, cp, knit turn against the hour. arrows. 2 ranks: we knit 13 sci in the next. RLS before. series, beginning with the first (the initial end of the finishing thread we are tying in this row of RLS); tie the 13th RLS, change the thread, as described above, making "Cross" of two colors of threads, (make sure that the thread always remains on the wrong side of the shoe!) , we knit 13 Tsc in the next. RLS before the series, (the initial end of the main thread is typed into this row of RLS), vpp, knitting turn. 3 - 6 rows - we knit as the 2nd row. Next, knitting from 7 - to 17 rows continues on the description of knitting the right shoe. Only now: even rows - purl, not even rows - facial. Tying the shoes along the contour. Strapping is done with a tambour seam along the entire facial contour of the upper parts of the shoes. At the right shoe we start the bandage from the outer outer side of the shoe. We find the extreme RLS of the first row, we enter the hook under the far floor of the loop, grab the thread, pull it out, insert the hook into the trail. the extreme RLS of the 2nd row, grabs the thread, pulls it through the pile on the hook. So we continue the strapping on the entire contour, performing a chain stitch and forming a chain of loops. At the end - cut and fasten a thread. At the left shoe we start the bandage from the front inner side of the shoe. We carry out the strapping as mentioned above and focusing on the photo.




Decoration of the shoe. After completing the strapping, try on the shoe on the chrysalis and determine the place of joining the parts. Sewing details of the toe of the shoe, sew button, bead - if desired!







The shoes are ready! Knit with pleasure! Author: Irina Tuchkova (Belanova)
Source : https://vk.com/club162016109







Post your comment

Information!  You need to be a member to comment. You can easily sign up from here.

0 comments

Related Posts