Childrens overalls with a lace collar

Click For Crochet Abbreviations List

For 3 (6) 12 (24) months. 
Child's height: 60 (70) 80 (90) cm. 

You will need 
Yarn (100% cotton; 50 g / 135 m) - 4 (5) 5 (5) hanks of terracotta, 1 hank of white; Spokes number 3.5; stocking needles №3,5; 2 (2) 3 (3) buttons with a diameter of 11 mm for overalls and 1 button with a diameter of 11 mm for a collar. 

Patterns and diagrams. 
Facial surface. Front 
rows - front loops, purl rows - back loops. In the circular rows of all loops knit facial. 

The main pattern 
Run according to the scheme. 

Openwork pattern for the collar 
Knit according to the scheme. 

Knitting density 
22 p. X 32 p. = 10 x 10 cm, connected by the front surface on the needles No. 3.5. 

Attention The 
overalls consist of 2 halves - front and back. 

Performance of work 
Rear half of overalls
Right leg 
In the spokes №3,5 dial 15 (17) 19 (21) p. And 1st p. (= izn. row) to knit purl. 
To knit the next row with facial ones, while uniformly adding the loops so that the needles have 23 (27) 31 (35) n. In the opposite direction, knit the next row with the wrong side. 
Continue to work on the pattern pattern (pay attention to the beginning of the pattern for different sizes). At the beginning of the faces. rows = in every 2nd p. 14 (18) 22 (26) times after / before chrome. loop add 1 p. At the end of the faces. rows knit without increments. When the length of the leg is 19 (23) 27 (32) cm, leave the work temporarily. 

Left leg
Type loops and start as described for the right leg, then knit symmetrically with it. To do this at the beginning of individuals. rows knit without increments, at the end of the above persons. rows - with increments (the beginning of the pattern - see the diagram). 
Connection of legs. 
Hinges of parts translate into one knitting needles and knit, continuing side gains. To do this, knit the loops of the right leg, in the continuation of the row, type the new 7 points and knit the loops of the left leg. 
Knit according to the pattern, until all the side gains are completed = on the needles 57 (65) 73 (81) p. 
Next, knit without gains until the product is 26 (30) 35 (41) cm. 
Then each has 14 (10 ) 8th (alternately in every 6th and in every 8th) p. subtract 4 (6) 8 (10) on both sides 1 p.
At the same time at a height of 41 (48) 55 (62) cm, the loops for the formation of the cut should be divided in the middle. To do this, close the middle loop and finish each side separately. At the same time, dial 1 item from the inner edge and knit with a pearl pattern for the cut edges in the first 2 points (= knot out the front loops in the next rows with the inside loops and the inside loops in the front rows). After completing all the reductions and dividing the loops into 2 parts = on the needles 25 (27) 29 (31) p. 
Next, from the beginning of the incision, knit 4 cm straight. 
Then from the outer edge close in each row for the armhole by 3, 2, 1, 1 p. And on the remaining 18 (20) 22 (24) p. Knit straight until the armhole height is 8 (9) 10 (11) cm .
Then close the first 6 (7) 8 (9) section for the neck from the inner edge and 3 points for rounding off another 1 section. Close the remaining 9 (10) 11 (12) sections for a straight shoulder edge in the same row. 
The second side finish symmetrically. 
The front half of the jumpsuit 
Left leg 
Knit, like the right leg of the back half. 
Right leg 
Knit, like the left leg of the back half. 
Connection of legs 
Loops of details, having typed 7 loops between them, connect as described for the back half, but knit without a cut. 

A gap to form at the same height and knit, as the rear half, to the last 12 (14) 16 (18) p. (check on the back) = on the spokes 35 (39) 43 (47) p.
Start shaping the neck: close the middle 9 (11) 11 (13) sections and finish each side separately, while for the rounding up close from the inside edge in each row 2, 1, 1 (2, 1, 1) 2, 1, 1, 1 (2, 1, 1, 1) p. 
Then knit straight and close the shoulder loops at the same height as on the back half. 
The second side finish symmetrically first. 

Run shoulder seams, side seams and stepped seams at a distance of 1 point from the edge. 
Bottom slats-slats-rollers The 
product to turn out on the wrong side. At the bottom edge of each leg, dial into hosiery needles No. 3.5 through 29 (33) 37 (41) paragraph and knit 5 p. In a circle. purl, in the next row to close the loop purl. 

Sliding boards
On stocking needles No. 3.5, from the seamy side of the product around the edge of each armhole, draw 44 (48) 52 (56) points and knit, as described for the lower slats-ruliki. Turn the product on the front side = the armholes of the armhole are twisted in the form of rolls, covering the place of the set of loops. 

Lace collar 
Knit a pattern according to the above scheme: 6 (8) 8 (10) p. openwork pattern, finish 3 p. with reductions. To do this, on needles No. 3.5, dial with a terracotta thread 133 (145) 163 (181) p. 
Knit all 9 (11) 11 (13) p. according to the scheme (= on the spokes 45 (49) 55 (61) p., last row = person. row), temporarily leave the loop. 
Connection of a collar with overalls, inlay
On the stocking needles №3,5 dial with individuals. side of the product along the edge of the neck of the loop: 9 (10) 11 (12) section from the section to the shoulder seam, on the rounded front sections 9 (9) 11 (12) section, in the straight section in the middle 9 (11) 11 (13 ) n. and another 9 (10) 11 (12) n. from the second shoulder seam to the cut = on the needles 45 (49) 55 (61) n. Break the thread. 
To put a collar (loops on straight knitting needles) with the wrong side on the jumpsuit and loops of the jumpsuit (loops on hosiery knitting needles) to knit together in pairs with the front ones. 
Continue the work of individuals. stitch and knit a tape, while on both sides dial for the seam 1 p. Through 6 (6) 7 (7) p. loops free to close.
Bakey turn on the wrong side of half and sew on the longitudinal side and at the ends. From the right edge of the cut, make 2 (2) 3 (3) hinged loops: the top one at the level of the bake, the rest / the rest - with an interval of 5 cm. 

Removable lace collar 
Knit, as described above, but with white thread. Run 9 (11) 11 (13) p. according to the scheme (last row = persons. row) = on the needles 45 (49) 55 (61) p. 
Then perform another 6 (6) 7 (7) p. individuals. stitch (1st row = face. row) and loop free to close. 
Part of the collar related persons. stitch, turn on the wrong side and sew. At one end of the collar to perform a hinged loop, on the other - sew a button. 

magazine "Burda Creazion" №3 / 2018

Post your comment

Information!  You need to be a member to comment. You can easily sign up from here.