Click For Crochet Abbreviations List
DIMENSIONS
38/40 (44) 48/50
YOU WILL NEED
Yarn (50% cashmere, 50% natural wool; 100 m / 50 g) - 850 (900) 950 g light gray; Knitting needles number 6; circular needles number 6; 6 buttons (diameter 50 mm).
PATTERNS AND SCHEMES
GUM A
Odd number of loops. After the initial row or set of loops, start with 1 purl row: edgeband, alternately 1 purlid, 1 front, finish 1 purl and edgelining. In the front rows of the loop knit by drawing.
GUM IN
The number of loops is a multiple of 5 + 4.
Facial rows: 2 facial, * 2 purl, 3 facial, from * constantly repeat, finish with 2 purl.
Purl rows: knit loops on the picture.
GUM WITH
The number of loops is a multiple of 5 + 4.
Facial rows: 2 purl, * 3 facial, 2 purl, from * constantly repeat, finish with 2 facial.
Purl rows: knit loops on the picture.
PATTERN FROM "KOS"
The number of loops is a multiple of 21 + 3 = knit acc. pattern. On it are given facial rows. In purses, knit all loops according to the pattern, nakida - according to. instructions. Rapport constantly repeat, finish loops after rapport. Constantly repeat 1st to 24th rows.
Braid pattern
FACE GUARD
Front rows - front loops, purl rows - purl loops.
KNITTING DENSITY
21 p. X 25 p. = 10 x 10 cm, connected by a pattern of "braids" and rubber bands B and C;
17 p. X 25 p. = 10 x 10 cm, connected by the front surface.
Pattern
Light gray coat with knitting hood
COMPLETING OF THE WORK
BACK
Dial 107 (107) 127 loops on the spokes and tie 3 cm = 7 rows for the strap with rubber band A, starting with 1 purl row.
Continue the work as follows: edge, 9 (14) 19 p. Rubber band B, 87 p. Pattern of "braid", 9 (14) 19 p. Rubber band C, edge.
After 54.5 cm = 136 rows (52 cm = 130 rows) 49.5 cm = 124 rows from the bar, close for the armholes on both sides 1 x 4 p., Then in each 2nd row close the 3 x 2 p. And 4 x 1 p. = 79 (89) 99 p.
After 73.5 cm = 184 rows from the slat, close for the shoulder bevel on both sides 1 x 7 (9) 11 p. And in the next 2 nd row another 1 x 7 (9) 10 p.
Simultaneously with the 1 nd shoulder grip, close the middle 31 pt for the neck and finish both sides separately.
For rounding along the inner edge, close in the next 2 nd row 1 x 3 p.
After 75 cm = 188 rows from the plank, close the remaining 7 (8) 10 n. Shoulders.
LINING POCKET (2 DETAILS)
Type 25 loops on the knitting needles and knit with rubber C, at the same time start with 1 edge, knit alternately 3 front, 2 purl, finish 3 front and 1 edge.
After 14.5 cm = 36 rows from the initial row leave the loop.
LEFT SHOT
Dial 56 loops on the spokes with 56 (61) loops and tie 3 cm = 7 rows for the strap with an elastic band A, at the same time, in the 1st purl row after the edge one, start with the 1st purl and finish 1 with the front (purl) front and edge.
Continue the work as follows: edge, 9 (14) 19 p. Rubber band B, 45 p. Pattern of "braid", edge.
For the strap of the pocket, after 13.5 cm = 34 rows from the strap, continue working on the 19–41th loops (24–46th loops) of the 29–51th loops (= 23 points) with an elastic band A.
For the edge of the pocket entrance, after 16 cm = 40 rows from the bar, close the 23 p. Of the pocket bar according to the drawing. In the next purl row, insert the pocket lining loops into the pattern instead of the closed loops, while knitting the edge linings of the pocket with the adjacent loops together according to pattern, the remaining 23 p. lining the pocket to include in the pattern of "braids".
Gap on the right edge to perform, as in the back = 42 (47) 52 p.
After 66.5 cm = 166 rows from the plate close for the neck on the left edge 1 x 1 p., Then in every 2nd row 10 x 2 p.
At the same time perform the shoulder bevel on the right edge, as on the back. At the height of the back close the remaining 7 (8) 10 p. Shoulder.
RIGHT SHELL
Knit the same as the left shelf, but in a mirror image.
SLEEVES
Dial 58 (62) 66 loops on the needles for each sleeve and tie 3 cm = 7 rows for the slat with elastic band A.
Continue the work as follows: edge, 7 (9) 11 sections with an elastic band B, at the same time start with 2 purses (2 face) 1 purl and 3 faces, 45 paragraphs in a pattern from “braids”; 7 (9) 11 p. Rubber band C, at the same time start with 2 purl, edging.
After 9.5 cm = 24 rows (7 cm = 18 rows) 5 cm = 12 rows from the strip add 1 x 1 pt for bevel sleeves on both sides, then 6 x 1 p. In each 10th row (alternately in every 6th and 8th row 9 x 1 p.) in every 6th row 12 x 1 p. and first include the loops in the rubber band B and C, respectively, and after a sufficient number of increases have been reached, expand the pattern from "Braids" on both sides = 72 (82) 92 p.
After 37 cm = 92 rows from the plank, close the sleeves for the sleeves on both sides 1 x 4 p., Then in each 2nd row 3 x 2 p., 8 x 1 p., 3 (4) 5 x 2 p. 1 x 3 p.
After 50 cm = 124 rows (50.5 cm = 126 rows) 51 cm = 128 rows from the strip, close the remaining 18 (24) 30 points.
HOOD
Start at the edge of the neckline, the arrow on the pattern = knitting direction.
Type 6 loops on the knitting needles and knit as follows: edgeband, 5 section with a pattern of "braids" (= first 5 loops of the pattern).
For a bevel on the left edge, type in each 2nd row from the initial row 5 x 4 p. And 5 x 3 p.
Include the first 16 extensions in the “braid” pattern, knit the remaining 19 additions with the pattern 5 = 41 p. After the last increase, weave a mark into the left edge, see also * on the pattern.
After 12 cm = 30 rows from the initial row add 1 x 1 p. On the left, then 2 x 1 p. In each 16th row = 44 p.
For the hood lintel, 32 cm = 80 rows from the initial row, dial on the left edge 1 x 43 p. And knit with the front satin finish = 87 p.
Through 5.5 cm = 14 rows from the start of knitting a lintel or through 37.5 cm = 94 rows from the initial row, the middle of the hood is reached.
Finish the hood in the mirror image, while the previous gains will be cuts.
After 75 cm = 188 rows from the initial row, close the remaining 6 sections. Sew the edges of the hood from the mark on both sides to sew to the jumper of the hood, while slightly prisosagivaya jumper and combining the same icons on the pattern.
ASSEMBLY
Run shoulder seams.
Sew the hood into the neckline, sew the end of the hood liner to the middle 11 cm of the neck of the back, sew the rounded edges of the hood on both sides to the remaining part of the neck, and combine the patterns from the "braids" of the shelves and the hood to the maximum.
For slatted shelves, dial on circular needles along the sides of the shelves to / from the neck, 125 stitches and between them, at the edge of the hood, dial 141 stitches and knit with pattern 1 on all 391 n., Starting with 1 inverse row. In the plank of the right ledge, through 1 cm = 3 rows from the set of loops, make 6 holes for buttons, for this, close 2 loops and 2 loops to knit together the front one, in the next purl row, type 3 new loops.
The bottom hole for the buttons to perform after the edge and 9 p. From the bottom edge, the next 5 holes for the buttons to execute with an interval of 18 p. From stitched together loops, respectively. With a slat width of 3 cm = 7 rows, close all loops in the pattern.
Sew the sleeves, complete the side seams and the seams of the sleeves. Lining pockets sew from the inside to the shelves. Sew buttons.