Click For Crochet Abbreviations List

Materials used to create the pillow: - YarnArt Samba yarn (100% polyester); - Pekhorka children's novelty yarn (100% acrylic); - eyes on a secure mount; - filler - hypoallergenic holofiber The size of the pillow is 27 x 23.5 cm, height is about 9 cm (excluding the head and legs) So, materials: - acrylic yarn Pekhorka children's Novelty (I have 4 hanks, but I think that a maximum of 2 is useful - 2.5 - depends on your mating density); - weed EarnArt samba (it also has 4 hanks, how many will leave exactly - I won’t say);
- eyes on a secure mount; 
- a thick needle for stitching the legs and tail. 

Abbreviations: 
KA - amigurumi ring 
Pr - increase (knit 2 columns in one loop) 
Ub - subtract (knit two columns together) 
Cbn - column without nakida 
Psn - half column 
Ccn - crossbar with 
Cc - link column STEP ONE 

! 

Head. 
1 row. 6 sbn in spacecraft (6) 
2 row. 6 pr (12) 
3 row. (1 un, pr) x 6 (18) 
4 row. (2 sbn, pr) x 6 (24) 
5 row. (3 sbn, pr) x 6 (30) 
6 row. (4 sbn, pr) x 6 (36) 
7 row. (5 sbn, pr) x 6 (42) 
8 row. (6 sbn., Pr) x 6 (48) 
9 row. (7 bun, pr) x 6 (54)
10 row. (8 sbn, pr) x 6 (60) 
11 row. (9 sbn, pr) x 6 (66) 
12-20 rows. 66 Sat (66) 
Knit cheeks: 
21 row. 9 pr., 9sbn, 9 pr., 39 sbn (84) 
22-23 rows. 84 Sat (84) 
24 row. 45 sbn, (11sbn, ub) x 3 (81) 
25 row. 45 sbn, (10 sbn, ub) x 3 (78) 
26 row. (11 sb, sr.) X 6 (72) 
27 row. (10 sb, ub) x 6 (66) 
28 row. (9 sb, ub) x 6 (60) 
29 row. (8 sb, ub) x 6 (54) 
30 row. (7sbn, sb.) X 6 (48) 
31 series. (6sbn, ub) x 6 (42) 
32 row. (5sbn, ub) x 6 (36) 
33 series. (4 sb, u) x 6 (30) 
34 row. (3sbn, ub) x 6 (24) 
35 series. (2sbn, ub) x 6 (18) 
36ryad. (1sbn, ub) x 6 (12)
37 row. 6 s. We cut the thread, leaving the thread for tightening, fasten, cut. 

So, knit the pillow itself. 

We collect 71 VP, we knit on one side 69 buns, in the last loop we knit 3 bunks, we continue on the other side - 67 bunks, in the last loop 2 buns. 
And knit in a circle. The process is not fast)) 

The photo is connected 12 rows. The length of the pillow is 30 cm. Consumption - I have 5 cm of cloth (folded in half as in the photo) and a little more than half of the skein of yarn was taken. So, I think, on the pillow will take about 2.5-3 hanks. 

The next stage - muzzle, ears and legs. 

Piglet: 

1 row. 6СБН in spacecraft (6) 
2 row. 3СБН in the first loop, 2СБН, 3СБН in the next loop, 2СБН (10) 
3 row. (1СБН, 1П) х 5 (15)
4 row. 2SBN, 1P, 3SBN in the next loop, 5SBN, 3SBN in the next loop, 1P, 4SBN (21) 
5 row. 3 sbn, pr, 3СБН to the next loop, 9сбн, пр, 3СБН to the next loop, пр, 4сбн. (28) 
6 row. For the rear walls 28 UBN 
7-10 rows. 28 sbn We 
cut the thread, leaving the tip for stitching. 

Oral: 

1: 6SBN in the amigurumi ring (6) Do not connect the ring. 
2: 1VP, turn knitting and knit (1SBN, 1P) - 3 times (9) 
3 row. 1 run, turn, (2 kn, etc.) - 3 times (12) 
Finish knitting .

Sew a penny between the cheeks, before completely sew - we stuff with filler, but not very tightly. Piglet sewn, now do the nostrils. From the bottom of the head, we stretch the thread approximately into the second row of one side of the patch, do a stitch and pull out the thread again at the bottom of the head. Then the same with the second nostril. 

We sew the mouth from the bottom right against the patch, slightly driving away the edge of the mouth. 

Ears - 2 parts. 

1 row. 6sbn in KA (6) 
2 row. (1sbn, pr) x 3 (9) 
3 row. 9sbn (9) 
4 row. (2sbn, pr) x 3 (12) 
5 row. 12sbn (12) 
6 row. (3 sbn, pr) x 3 (15) 
7 row. (4sbn, pr) x3 (18) 
8 row. (5sbn, pr) x 3 (21) 
9 row. (6sbn, pr) x -3 (24) 
10 series. (7sbn, pr) x 3 (27) 
11 row. (8sbn, pr) x 3 (30)
12 row. (9sbn, pr) x 3 (33) 
13 row. (10sbn, pr) x 3 (36) 

Now we bend the front parts of the ear, as shown in the photo. We sew so that the ear does not straighten. 

We attach to the head, fasten with pins and look - so that everything is exactly the same. If everything suits - sew. Shape the ears, slightly bending the tips. If you wish, you can slightly hem them so that they do not unbend. 

Paws (claws) - 4 parts: 

1 row. 6 sbn in spacecraft (6) 
2 row. 6 pr (12) 
3 row. (1 un, pr) x 6 (18) 
4 row. (2 sbn, pr) x 6 (24) 
5 row: (3 sbn, pr) x 6 (30) 
6 row. (4sbn, pr) x 6 (36) 
7 row. (5sbn, pr) x 6 (42) 
8 row. (6sbn, pr) x 6 (48) 
9 row. (7sbn, pr) x 6 (54) 
10-11 rows. 54 sat (2 rows)
12 row. (7 Ub, u) x 6 (48) 
13 row. (6sbn, ub) x 6 (42) 
14 row. (5sbn, ub) x 6 (36) 
15 row. (4sbn, ub) x 6 (30) 
16 -25 rows. 30 UBN (30) (10 rows) 

Fill the foot not up to the end, leave a little free space at the top, connect both sides together, knitting together two sides of the UBN - it turns out 15 UBN. Trim the thread, leaving the tip for stitching. 

Girls! My pillow turned out to be 27 cm x 23.5 cm. The yarn 
took 2 skeins. 
Before closing the loops we fill the pad with filler. We sew. Or you can do it like me - just together knitted both sides. 

Tail: 
Recruit 25 VP, knit 24 loops (starting from the second from the hook) PSSN (half-column with a crochet). Finish knitting, cutting the thread (leave the tip for stitching) 
_______________________________________________________________________________ 
So, the last step: ASSEMBLY! 

To begin with, we apply all the details to our pillow. I placed 2 legs in front and 2 legs in the back. Attached the head and pinned it to the shorter part of the pillow. 

Sew tail - on the shorter side exactly in the middle. 
Sew hooves as we put them. 

From the side of the nape of the head we put pins-markers - note how we will sew the head and the pillow. On the head is about 27-28 series. We do this so that the head is level, not looking down.

On the pillow itself, with the help of a ruler, we mark 5-6 cm from the edge of the pillow, strictly in the middle! That the head was located at the same distance relative to the legs. 

That's all)

Source