Nice Knitwear Free Pattern

Click For Crochet Abbreviations List

Dimensions
S/m (M/L) L/XL

Width of the product on the grasp of the breast
84 (93 in) 102 cm

Length of product
64 (66 in) 68 cm

You will need to
Yarn (70% Bamboo, 30% cotton; 50 g/150 m) – 3 (3) 4 Motka black, 3 skein Grey, 3 (4) 5 uncoloured Motks, 3 (3) 4 skein Beige, 2 (3) 4 Motka Peach, 3 (3) 4 skein light pink; Spokes № 2.5 and 3; Circular Spokes № 2.5, 40 and 80 cm long.

Patterns and diagrams

2 p. Touch together the face with a tilt to the left
1 p. Take off as individuals., the next loop is to touch the front and stretch it through the removed loop.

3 p. Touch together the front
1 p. Remove as persons., 2 p. Projazat Front and Stretch this loop through the removed.

forming wedges
17 p. To touch the face, work to turn, throw the thread and the row in the opposite direction purl.

* Knit Facial to the previous turn, with the last loop to touch together the front with a loop of rotation of the previous row (to close the gap), then projazit another 16 (17) 18 p. Facial after the previous turn, turn, throw the thread and Projazit Reverse direction of the purl *, repeat from * to * 2 times.

Knit to the last loop of the previous turn, then this loop to touch together the front with a loop of rotation of the previous row (to close the gap), to bring the series to the end of the facial.

The next row of knit purl is on all loops.

Then Projazat 65 (68) 71 p. Facial, work to turn, flip the thread and the row in the opposite direction purl.

* Knit Facial to 16 (17) 18 p. Before the previous turn, rotate, flip the thread and pull the row in the opposite direction purl *, repeat from * to * 2 times.

For a wedge of each color, perform 4 rotations, closing the gaps as described above.

Make sure that the total number in the series remains unchanged.

Openwork Path
1 persons., * 1 scum, 2 p. Touch together the face. With a tilt to the left *, repeat from * to *.

Openwork pattern

Sequence of strips
* 18 p. front Surface (= Wedge with turns) gray thread;
1 p. openwork track and 1 p. purl black thread;
12 p. openwork pattern in the scheme of beige thread;
18 p. front Surface (= Wedge with turns) light pink thread;
1 p. openwork track and 1 p. purl unpainted thread;
6 p. Facial Glade Peach thread;
2 p. Front surface of unpainted thread;
6 p. front surface gray thread;
18 p. front Surface (= Wedge with turns) black thread;
1 p. openwork track and 1 p. purl beige thread;
12 p. openwork pattern in the scheme of unpainted thread;
8 p. Front surface with turns peach thread;
8 p. front Surface (= Wedge with turns) light pink thread;
6 p. front Surface beige thread;
6 p. front surface gray thread;
1 p. openwork track and 1 p. purl black thread;
18 p. front Surface (= Wedge with turns) unpainted thread;
12 p. openwork pattern in the scheme of peach thread;
18 p. front Surface (= Wedge with turns) gray thread;
6 p. Front surface of unpainted thread;
2 p. Front Surface with beige thread *.
Repeat from * to *.

Important!
The density of your knitting should coincide with the preset, so before you begin to work, be sure to link the sample. To do this, dial 35 p. and bring 12 cm. Measure
10 cm wide. If on this segment you will get less than 26 p., change spokes to thinner.

If one number is specified in the description, it applies to all dimensions.

The sleeves as well as the upper parts of the front and back are knit without wedges, even in rows.

Density of knitting
26 p. x 36 P. = 10 x 10 cm, is associated with the front surface of the spokes № 3.

Doing the work

Lower part of the backrest
On spokes № 3 to dial a black thread 81 (85) 89 p. and Projazati1 row of purl (= N. Row).

Continue the work by observing the sequence of strips and wedges as described above. In 218 (242) 266 rows on the upper edge (shorter) should be at 12-18 less than the bottom.

Loops close.

Upper part of Backrest
Along the short (upper) edge of the lower part of the backrest, dial the spokes № 3 to dial the black thread of the loop, introducing the spokes in each 2nd row = 109 (121) 133 p. Knit strips in the specified sequence, with the 1st p. Tie Black Thread.

After 8 cm make in the middle of the row mark and close for armholes on both sides at the beginning of each row of 3, 3, 2, 1, 1 (4, 3, 2, 2, 1, 1) 5, 3, 3, 2, 1, 1, 1 p. = 89 (95) 101 p.

At an altitude of 20 (21) 22 cm from the beginning of the armholes close for the Gordovina Middle 31 (33) 35 p. And both sides to finish separately.

To round the neck from the inner edge close at the beginning of the row 1 times 3 p. and 1 times 2 p.

At the same time for the shoulder bevel close from the outer edge 8, 8 (9, 9) 9, 10 p. Then close the remaining loops of the shoulder.

The second side to finish symmetrically.

Before

Knit like a backrest, but with a deeper neck. To do this, at an altitude of 14 cm from the beginning of the armholes close the Middle 13 (15) 17 p. and both sides to finish separately.

From the inner edge close to the fillet of the neck in each 2nd P. 4, 3, 2, 2, 1, 1, 1 p. (For all sizes).

Shoulder Bevi to perform as on the backrest.

Sleeves

That the colour strips on sleeves, forward and a backrest coincided, length of a sleeve to a armhole should make 41, 2 (42) 43 SM!

On spokes № 3 to dial a black thread 63 (67) 71 p. and to knit strips in the specified sequence (without wedges).

In 31 (35) 39-M P. Add to the lateral bevel on each side (after and before the crown) to 1 p. Repeat these increments in each 10th p. = 85 (89) 93 p.

In the same row as on the back (to compare patterns) to start to form Okkat: to close on both sides at the beginning of each row 1 times on 3 p. and 1 times on 2 p.

Further for Skosov to reduce on both parties 3 times in each 4th p. on 1 P. as follows: 1 persons., 2 p. Projazat together a front with a slope to the left, Projazat a row to the last 3 p., 2 p. Projazat together obverse, 1 persons.

Then repeat these ubavki in each 2nd p. Until the spokes will remain 37 (39) 41 p.

After that close on both sides at the beginning of each row another 1 x 2 p., 1 x 3 p. and 1 x 4 p.

The remaining loops close in one row.

Assembly

Perform shoulder and side seams. Run the seams of the sleeves and sew the sleeves into the armholes, aligning the colored strips.

Bottom strapping

On the bottom edge of the front and back dial on circular spokes № 2.5 black thread loops, introducing the spokes in each row (the number of loops should be multiple 2).

Knit in a circle 1 p. purl, 1 p. openwork track and another 1 p. purl. In the next row, all loops close to the front.

Hose strapping

On the bottom edge of sleeves to dial on circular spokes № 2.5 a black thread of a loop, introducing a needle in each row (number of loops should be multiple 2).

Knit in a circle 1 p. purl, 1 p. openwork track and another 1 p. purl. In the next row, all loops close to the front.

Running neck

On edge of a neck to dial on circular spokes № 2.5 a black thread of a loop, having begun from a right humeral seam. Entering the spokes in each loop and skipping each 5th p., bind the Bale as described for strapping.