Then, continuing knitting, we knit the outer walls of the refrigerator
Krug.r. 1: 1 in the ascent, do not turn; knit around the whole detail, 87 sb on the 1st side (skipping the first row), 64 sb for the near wall of the hinges (as shown in the picture on the right) on the 2nd side, 87 sb on the 3rd side (missing the last row) 64 сбн по 88 ряд, 1 сс in the 1-st сбн (302)
Круг.р. 2-32: 1 in the ascent, 302 sb; 1 cc in the 1 st c. (31 rows)
Finish knitting, cut the thread.
Let's start knitting the inner rear of the refrigerator case
White thread to type 63
pcs Row 1 (out side): starting from the 2 nd from the hook 62 sbn (62)
Note: Place a short piece of colored yarn behind the back of any loop of the 1st row to mark the faces. side and top edge.
Rows 2-86: 1 in the ascent, turn, 62 sb (85 rows), the thread is uncirculated.
Then continuing knitting, knit the inner walls of the refrigerator
Kurg.r. 1: we knit around the entire piece, 85 sb on the 1st side (skipping the first row), 62 sb for the near wall of the loops (as shown in the right picture) on the 2nd side, 85 sb on the 3rd side (missing the last row ), 62 сбн on 88 row, 1 сс in the 1-st сбн (294)
Круг.р. 2-32: 1 in the ascent, 294 sb; 1 cc in the 1 st c. (31 rows)
Finish knitting, cut the thread, leaving a long end for sewing.
Assembling the crocheted crochet casing of the refrigerator
Below are dimensions for pieces of cardboard, based on knitting from fine yarn. If you knit from another yarn you need adjustments.
Before cutting the cardboard, check it with the knitted detail to make sure that the cardboard is perfect.
Cut a piece of cardboard 24 cm x 30.5 cm and put it inside the outside of the chassis.
Cut a piece of cardboard 11 cm x 112 cm. Bend the cardboard 25 cm from the edge, then 31 cm from the first fold and 25 cm from the second fold, leaving 31 cm from the edge. Glued Scotch two short edges together, forming the last corner of the open cube. Place the cardboard inside the outside of the case against the sides.
The inner (white) part of the body is put on top of the cardboard to the cardboard and to combine the upper parts. Sew together the outer and inner parts of the body. (as it shown on the picture).
We knit the shelves of the refrigerator
We knit the shelves of the refrigerator crocheted, 3 pcs.
A white thread to type 61 in.
Row 1 (out side): starting from the 2 nd from the hook 60 sb (60)
Note: Place a short piece of colored yarn over the rear wall of any 1st row hinge to mark the faces. side
Rows 2-52: 1 in the ascent, turn, 60 sb (51 row)
Knit finish, cut the thread. Bind two more shelves.
Cut pieces of 8.5 cm x 23 cm from the cardboard.
We knit the edge of the shelves.
Row 1: Fold the shelf in half with the wrong side inward. Knit through both layers and at the end of the rows, attach the white thread to the sb in the first row at the fold; 26 sb on the 1 st side, 60 sb on the 2 nd side, insert the cardboard, 26 sb on the 3rd side (112)
Row 2: 1 in, turn; 112 sbn, finish knitting, cut the thread, leaving a long end for sewing.
Sew on the shelf of the crocheted refrigerator.
Focus on the photo when placing the shelves:
Insert the shelf inside the body - 6.5 cm from the top, folding the edge to form folds along the sides and back of the case. Sew the shelf into place. After 7.5 cm, below sew the second shelf. Sew a third shelf through 7.5 cm from the 2nd.
We knit the door of the refrigerator
We knit the door of the refrigerator crochet
We begin knitting from the outside of the door.
With a yellow thread, dial 65 in.
Row 1 (out side): starting from the 2 nd from the hook 64 sb (64)
Note: put a short piece of colored yarn on any loop of the 1st row to mark the faces. side and top edge.
Rows 2-88: 1 in the ascent, turn, 64 sb, do not cut the thread (87 rows)
Then, continuing knitting, knit the outer walls of the refrigerator door
Circle.r. 1: 1 in the ascent, do not turn; knit around the whole detail, 87 sb on the 1st side (skipping the first row), 64 sb for the near wall of the hinges (as shown in the picture on the right) on the 2nd side, 87 sb on the 3rd side (missing the last row) 64 sb on the 88th row, 1 cc in the 1 st sb (302)
Circ.r. 2-11: 1 in the ascent, 302 sb; 1 cc in the 1 st c. (10 rows)
Finish knitting, cut the thread.
Then we knit the inside of the refrigerator door
White thread, type 63
pcs . Row 1 (out side): starting from the 2 nd from the hook 62 sbn (62)
Note: Place a short piece of colored yarn behind the back of any loop of the 1st row, to mark the faces. side and top edge.
Rows 2-86: 1 in the ascent, turn, 62 sb, do not cut the thread (85 rows)
Next, we knit the walls
Circle 1: 1 in up, do not turn; we knit around the entire piece, 85 sb on the 1st side (skipping the first row), 62 sb for the near wall of the loops (as shown in the right picture) on the 2nd side, 85 sb on the 3rd side (missing the last row) 62 сбн по 88 ряд, 1 сс in the 1-st сбн (294)
Круг.р. 2-11: 1 in the ascent, 294 sb; 1 cc in the 1 st c. (10 rows)
Finish knitting, cut the thread, leaving a long end for sewing.
We collect the door of a crocheted refrigerator
Cut a piece of cardboard 24 cm x 30.5 cm and attach it to the outer part of the door.
Cut a piece of cardboard 3 cm x 112 cm. Bend the cardboard 25 cm from the edge, then 31 cm from the 1st bend and 25 cm from the 2nd bend, the edge will remain 31 cm. Gluing the two short edges together with adhesive tape, forming the last one corner of an open cube. Apply, the resulting part to the walls of the outer part of the door.
The inner (white) part of the door is to be put from the side to the cardboard and to combine the upper parts. Sew together the outer and inner parts of the door of a crocheted refrigerator.
We knit door shelves
We knit door shelves - 4 pcs.
Lower part
White thread to type 61 in.
Row 1 (front side): starting from the 2 nd from the hook 60 sb (60)
Note: Mark 1 row as the front side.
Rows 2-15: 1 in the ascent, turn, 60 sb (14 rows)
Knit to finish, cut the thread.
Upper part
Use a white thread to sew 61 in.
Row 1 (front side): starting from the 2 nd from the hook 60 sb (60)
Note: Mark 1 row as the front side.
Rows 2-15: 1 in the ascent, turn, 60 sb (14 rows)
Knit finish, do not cut the thread.
Cut 4 pieces of cardboard 5 cm x 23 cm.
Bokovinki
Circ.r. 1: put the upper and the lower parts together with the wrong side inward, the upper part outwards, and knit along the edge through both layers around, 1 in the ascent, 14 sb on the 1st side (skipping the 1st row), 60 sb for the near wall of the loops on the second side, 14 sb (bypassing the last row) on the 3rd side, insert the cardboard, 60 sb on the 4th side, 1 ss in the 1st roll (148)
Circle.r. 2-8: 1 in the ascent, 148 sb, 1 ss in the 1st sb 97 rows).
Knit the thread, cut the thread. Bind 3 more shelves.
Sew the shelves to the refrigerator door.
Note: the shelves will protrude by 1.2 cm from the door of a crocheted refrigerator.
Focus on the photo by placing the shelves: sew one shelf at the bottom of the inside of the door.
Sew the bottom of the 1st shelf at a distance of 6.5 cm from the top.
Sew the bottom of the 2nd shelf at a distance of 7.5 cm from the 1st shelf
Sew the bottom of the 3rd shelf at a distance of 7.5 cm from the 2nd shelf
We knit boxes for vegetables
We knit boxes for vegetables - 2 pcs
First we knit the bottom of the box
Collect a white thread 29 bp
Row 1 (from the side): starting from the 2 nd from the hook 28 sb (28)
Note: Place the marker behind the back of any hinge of the 1st number that mark the faces. side.
Rows 2-24: 1 in, turn; 28 сбн (23 ряд)
Knitting is finished, the thread is cut off.
Then we knit the upper part of the drawer
Pick up the white thread 29 vp
Row 1 (out side): from the 2nd to the bottom of the hook 28 sb (28)
Note: Place the marker on the back of any loop of the 1st row that marks the faces. side.
Rows 2-24: 1 in, turn; 28 сбн (23 ряд)
Knitting is finished, the thread is not cut off.
Cut out a piece of cardboard measuring 8.5 cm x 10 cm.
Continuing knitting, we knit the sides of boxes
Circle.r. 1: put the upper and lower parts together with the wrong side inwards, the upper part outwards, and knit along the edge through both layers around, 1 in, 23 on the 1st side (skipping the 1st row), 28 sb for the near wall of the loops along On the 2nd side, on 23rd seb (bypassing the last row) on the 3rd side, insert the cardboard, 28th cable on the 4th side, 1c in the 1st roll (102)
Circle.r. 2-8: Вп 1, 102 сбн, 1 сс in the 1st сбн (7 rows)
We knit the hinges for the door
We knit the hinges for the refrigerator door crocheted
Yellow thread to dial 81 in.
Row 1: starting from the 2 nd from the hook 80 sb (80)
Rows 2-14: 1 in, turn; 80 sb (13 rows). Cut the
knitting, cut the thread, leaving the long end for sewing.
Note: the hinges are sewn to the side of the body and door to allow the door to open and close.
Attach the door to the body and apply the hinge to the front side, aligning the top of the parts. Align the center of the hinge with the edges of the body and door, as shown. Using the left end of the thread, sew the loop over the edge, around the entire loop. Open the door and sew over the edge of the center of the hinge and the edge of the door. Similarly, sew the edge of the corpse to the center of the loop.
We knit the legs for the refrigerator
We knit the legs for the refrigerator crochet - 6 pcs
Dark brown thread to type 4 in and connect them to the ring. Next, knit in a circle, and the beginning of each row to do 1 in for lifting, and finish the series 1 ss in this item
Circle.r . 1 (front side): 6 сбн (6)
Кругрр. 2: (pr) х 6 (12)
Кругрр. 3: (пр, 1 сбн) х 6 (18)
Круг.р. 4: (пр, 2 сбн) х 6 (24)
Круг.р. 5: (pr, 3 сбн) х 6 (30)
Круг.р. 6: 30 sb for the back of the hinges (see figure) (30)
Circle. 7 and 8: 30 sb in each loop below (2 rows).
Finish the knitting, cut the thread, leaving a long end for sewing. Fill the legs with filler.
Orienting on the photo, sew the legs to the crocheted refrigerator - 4 legs on the bottom of the case and 2 on the bottom of the door.
Knit the handle of the refrigerator
Knit the handle of the refrigerator crochet