TIE BED
Front and back rows - front loops.
FACIAL IRON
Front rows - front loops, purl rows - purl loops.
UNDERCAREED ADDITIVES
At the beginning of the rows edge and 2 loops knit together the front; at the end of the row in front of the edge 2 loop, knit together with the inclination to the left (1 loop to remove, as the front one, 1 face, then stretch it through the removed loop) edge.
KNITTING DENSITY
18 p. X 4 p. + start / end row = 10 x 2 cm, connected by the front surface;
18 p. X 36 p. = 10 x 10 cm, connected with a garter;
19 p. X 25 p. = 10 x 10 cm, connected by a checkered pattern (measured in a slightly stretched form).
Attention!
Backpack knit from 6 individual parts and a belt (without a pattern); arrows on the details = knitting direction. In the drawstring area, the backpack is slightly wider. This is not counted on the pattern.
Pattern
COMPLETING OF THE WORK
SIDE DETAIL WITH BOTTOM
Use a dark gray thread to dial 46 loops on the spokes and, for the bottom drawstring, tie 4 cm = 4 rows of the front satin stitch and 8 rows of garter stitch.
Continue the work pattern in the cage.
After 105 cm = 262 rows from the drawstring, tie for the 2nd drawstring 4 cm = 8 rows of garter stitch and 4 rows of the front satin stitch, then close all the hinges, as the front ones.
BACKSIDE
Bright pink thread dial 58 knit needles and knit pattern into a cage.
Through 37 cm = 92 rows from the initial row, tie for the drawstring 4 cm = 8 rows of garter stitch and 4 rows of the front satin stitch, then close all the loops, as front ones.
FRONT SIDE
Knit as the back side, but for the hole for the cord in the 5th row of the drawstring, close the middle 2 points and dial again in the next row.
POCKET
Use dark gray thread to knit 34 loops on the knitting needles and knit a pattern into a cage.
After 17 cm = 42 rows from the initial row, tie another 2 cm = 8 rows of garter stitch for the plank, then close all the loops, like face loops.
VALVE POCKET
Pink thread to collect 30 loops on the knitting needles and knit garter stitch without edgebands.
After 5.5 cm = 20 rows from the initial row, subtract 1 p. From both sides. To do this, knit the 2nd and 3rd loop in the front row, as well as the 3rd and 2nd loop from the end together with the front one, respectively.
These reductions are repeated 6 more times in each front row.
After 9.5 cm = 34 rows from the initial row, close the remaining 16 points, as facial ones.
For a buttonhole loop, fasten a pink thread with a hook on the closed edge close in front of the middle; run a chain of 9–10 incl. and fix it right behind the middle.
Thread cut and fasten.
VALVE CLIPS
Use pink threads to put 44 loops on the needles and tie 4.5 cm = 16 rows of garter stitch.
To continue the work with a checkered pattern, at the same time start from the 7th row of the scheme and execute the pattern between the edge ones on only 42 loops, i.e. Do not knit the 1st and last loop of the scheme.
For rounding off after 1.5 cm = 4 rows from the change of pattern, underlined on both sides underlined 1 x 1 p., Then in each 2nd row it is underlined to underscore 6 x 1 p. = 30 p. instead of underlined reduction, knit 2 loops together in purl).
After 8 cm = 20 rows from the change of the pattern, close on both sides 1 x 2 points, then in each 2nd row 4 x 2 points.
After 12 cm = 30 rows from the change of pattern, close the remaining 10 points.
Use pink thread to draw 82 loops on the circular needles along the rounded edge (without the initial row) and, starting with 1 purl row, tie 2 cm = 7 rows of garter stitch.
Then close all the loops as facial.
In the middle of the rounded edge, hook up the buttonhole (see pocket flap).
BELT (2 DETAILS)
Bright pink thread to collect 84 loops on the spokes and, starting with 1 purl row, tie 4.5 cm = 17 rows of garter stitch.
Then close all the loops as facial. Belt width with closed edge = 5 cm.
ASSEMBLY
Sew a pocket with folded edge seam to the front in the middle, while aligning the initial rows of both parts. The initial flap pocket pocket sew over the pocket on the front side of the backpack. To pocket sew a button in front of the loop.
Belts on both sides to put on the outer 5 cm back side, aligning one end with the initial row. The ends of the belts tack to the starting row.
Sew a side part with the bottom between the front and rear sides, while ensuring the precise alignment of the edges of the butt joints; The initial row of the pocket, as well as the ends of the belts, should be locked in the corresponding seams.
The upper drawstring along the last row of garter hem inside.
The fastener flap is sewn with a starter next to the entire width of the back side to the fold line of the drawstring, while on both sides at a distance of 4 cm from the edge grab the free ends of the straps.
Twist the cord from the pink thread to approx. 130 cm and through the hole into the drawstring.
Sew a button to the front side opposite the hinge on the fastener flap.
http: /verena.ru/vyazanie-spicami/trekhtsvetnyy-ryukzak-s-uzorom-v-kletku-3674/