Click For Crochet Abbreviations List
Materials:
Spokes number: 3 -basic; 4,5- when you need a
filler -85 grams per doll.
Threads for Anabel: 30g. each color: light pink (or skin color), white and yellow. The same number of blue, gold, brown, dark brown and pink flowers.
Threads for Edward: the same number of light pink (or skin color), white, blue, light blue, gold, tan, dark brown and pink.
Anabel
Shoes, Legs, Body and Head.
Right leg and boot.
Start with the base of the right shoe and dial with a blue 7 thread.
Mark the 7th loop with a colored thread, then dial 10 more loops. = 17p.
Invalid row.
Sequence: Adding to each loop = 34p.
Start from the purl series to continue the stocking of 7 rows.
Tear off the blue thread, connect a light pink or skin color (for the legs)
Knit with a stocking of 2 rows.
Form the foot:
Next row: 4 faces, (2 faces.) 9 times, 12 persons. = 25p
Wrong series.
Next row: 4 faces, (2lits.vm) 5 times, 11 faces, = 20p
Wrong series.
Tear off the thread, connect a white thread for the trousers.
Knit 18 rows of stocking knit.
Tear off the thread and leave the hinges on the spare spoke.
Left foot and boot:
Begin with the base of the left boot and dial with a blue thread 11 pt.
Mark the 11th loop with a colored thread, then dial 6 more loops. = 17p.
Invalid row.
Next: add to each loop = 34p.
Start with the purl series and continue the stocking with 7 rows.
Tear off the blue thread, connect a light pink or skin color (for the legs)
Knit with a stocking of 2 rows.
Form the foot:
Next row: 12 faces, (2 faces.) 9 times, 4 persons. = 25p
Wrong series.
Next row: 11 faces, (2lits.vm) 5 times, 4 faces, = 20p
Wrong series.
thread, connect a white thread for the pantaloon.
Knit 18 rows of stocking knit.
Body and head:
Mark both ends of the trace. series.
Face outward and continue with white thread; tie the front with 20 loops of the left leg, then 20 loops of the right leg with a spare knitting needle. = 40p.
Knit stockings with 13 rows.
To cut off the white thread, attach the yellow thread to the upper part of the body.
Knit stockings with 10 rows.
Cut off the yellow thread, connect a light pink or skin color.
To form the shoulders:
Next row: 6 faces, (2 faces.sm) - 5 times, 8 faces, (2lic.vm.) - 5 times, 6 faces. = 30p.
Knit stocking 7 rows.
Add to form a head:
Next : row: (1 face, increment in the next 2 loops) to the end = 50p.
Knit a stocking 23 rows, marking the center of one of these rows.
To form the top of the head:
Next row: 2 faces, (2lits.vm., 2lic.) To the end = 38p
Wrong range. Track: 2 rows, (2lits.vm., 1lic.) To the end = 26p
Next.: (2inv.vm.) to the end = 13p
Pull the thread through the hinges, tighten and secure.
Assembly:
Connect the ends of the body and head rows, leaving 4 holes in the body for filling.
Connect the ends of the rows of each leg from the marking to the typed loops. Marking at each edge of a series of typed loops is the center of the front of the foot.
Starting from marking sew over the edge of typed loops together. The seam of the leg will be turned inside the legs. Turn the doll outward. Fill the feet, then the legs and body through the opening in the seam. Each leg should be 11 cm in circumference. Body-21 cm at the waist.
Close the hole in the seam. Fill the neck, then head. The head should be 24 cm in circumference. The neck will be slightly smaller than the body and head in this phase.
Forming the neck
Use a double thread according to the color of the head and starting from the center behind to collect the loops around the 4 rows below the row, where loops were added for the shape of the head. Tighten the thread and tie the ends into a knot. Sew the ends of the thread into the neck.
Face
Make marking in the center of the face.
[/ l] [l] Mark the positions of the eyes with pins: 12 rows above the row, where the additions were made to form the head, 4 loops between the eyes.
Dark brown thread, tambour seam, starting at the intended position and ending in 2 rows below the mark. Make another swivel stitch in the same place.
Repeat also for the second eye.
Use a pink string to make a mouth. Mark the position of the lower edge of the mouth in the center of the face - 4 rows above the row, where additions were made to form the head. Make 2 small stitches in the shape of V, the lower part of V is marked.
Check your cheeks with a red pencil.
the author does not have a nose in the description ... I embroidered it with two stitches.
2 pieces
Begin with the top edge and white threads to dial 30p
Face series
Make the edge of the pico:
Next row: 2 faces, (накид, 2лиц.мм) to the end
Beginning with the faces of the row, knit with a stocking of 2 rows for the front side of the ruffle .
Close the loops with purl.
The front side of the hosiery knit out to fold the strip along the edge of the pico, sew the edges together.
Place the frill on the pup's eggs with the front side of the product facing outwards and the seam on the center behind. Sew the edges of the closed loops to a row of white on the leg.
Hair:
With spokes 4.5mm brown thread, type 16p
1 row-wrong side !!!
1 and 2 rows of faces
3 times - (2 in) 2 times, face up to the last 3 loops, turn
4 faces up to the end of
5 rows, prib in the first 2p, faces to the last 5 loops, turn
6 rows of faces to the end
Repeat these 6 11 times and close the hinges.
Assembly:
Sew the edges of typed and closed loops together. Collect around the short edge with a thread, pull and fasten.
Place the detail on the head of the doll with a seam on the center behind the head. Make sure one of the wavy ends is in the center of the forehead. Attach the part 3 rows above the top of the eyes. Then attach all the wavy ends to the head, sew.
Beam
Brown thread dial 10p
Knit 31ryad Garter, taking the 1st loop is not provyazanoy in each row.
Close the hinges.
A number of closed loopbacks.
Sew the edges of typed and closed loops together. Collect around one set of ends of rows, pull and fasten.
Screw on face and fill. Collect around the other set of ends of the rows, pull and fasten, but the thread does not break off. Pull the needle through the center of the assembled ends of the rows to another set of assembled ends of the rows, then back. Pull the thread to straighten the mold and fasten it.
Attach the flat end of the beam to the head so that one set of assembled ends of the rows is opposite the other assembled end of the hair rows. Wise translation, of course, but in principle everything is clear, if you look at the photo))
Sew a bundle to the head, making stitches through the hair in the head to better anchor.
Locks:
Make 4 pieces
Spin 3mm and brown thread to dial 20p and close. A series of closed loop-faces.
The front side of the outside to take the ends of the rows of each product together. Sew on two curls side-by-side from two sides to the head to the bottom edge of the hair.
Flowers:
Make 4 items.
Blue thread dial 16p
1st row-front side-2lit.vm to end = 8p
Thread extend through loops, tighten and fasten.
Sew the ends of the rows together. Use a yellow string to make 2 small stitches in the center of the flower. Sew on 2 flowers from two sides to the head to the top edge of the curl.
Skirt and apron
Begin with outer edge and draw a white thread with 100p
Knit 5 knitted stockings
Make a pico edge:
Next row: 2 faces., (Nakid, 2lits.vm.) To the end.
Starting from the front row, knit 5 rows of stocking.
Track number: Face
Tear off the white thread, connect the gold.
Start with a front row knit stocking 6 rows.
Cut off the gold thread, connect the yellow thread for the apron section.
Knit Garter Stitch 4 rows.
Starting from the front row, knit stockings with 18 rows.
Tracklist; 2lits.vm. to the end = 50p.
Close the hinges.
Assembly:
Fold the hem, hem.
sew a skirt to the first row of yellow color.
Hands:
Make 2 the same.
Start from the end of the palm and color as for the head to collect 8 loops.
Invalid row.
Track number:
Increase the number of persons in each loop-16p.
Starting from the purl series, knit stockings of 19 rows.
Cut the thread and insert a gold thread for the sleeve.
Knit Garter Stitch 2 rows.
Track:
3 rows, (increase, 2 faces.) - 3 times, add to the next. loop, 3 lines = 20p.
Starting from the purl series, knit with a stocking of 3 rows.
Form the top:
Close3 n at the beginning of the trace of 2 rows = 14n Reduce
by 1 in two ends the trace of 4 rows = 6p The
trace of a row of -2 persons. hm to end = 3p
Pull the thread through the hinges, tighten and fasten (B & T)
Assembly:
Connect the ends of the rows of the hand, leaving the formed top open. Sew on one side of the product sew along the typed loops. Turn it to the face and fill it gently so that it is 8 cm in circumference in the center.
To form a wrist, tie a thread that matches the color, around each hand, 2.5 cm above the edge of the typed loops. The ends of the thread are sewn into the hand.
Put your hands down until ruffles are ready. Collections
:
Make 2 the same.
Knit as for a trousers only to type 24p instead of 30. In the seam
at hand, sew the edges of the closed loops of the frill to the hand at the level of the lower edge of the sleeves.
Sew sleeves:
Attach the open sleeve edge to the doll, the B & T loops 1 cm below the neck. Sew, adding a little filler to the top of the sleeve. (if needed)
Collar
Start at the bottom edge of the collar, with a gold thread, dial 48 p
1 row of rows - the front side!
Close the hinges by marking the center of the edge of the closed hinges.
Place the collar on the neck with the front side facing outwards. Took the ends of the rows together behind the doll. Attach the seam ends of the rows to the center of the top of the upper body so that the edge of the closed collar loops is at the level of the 1st row tied with a solid color.
Attach the labeled collar center in the center in front.
Now continue to attach the edge of the closed loops to the place until the golden sleeve. Attach the collar over the sleeves closer to the neck to form a square line as shown in the picture. Sew a collar in the center of the front row, between the edges of the typed and closed loops.
Double collar:
With a yellow thread knit the collar and sew the rows together, as well as for the collar above. just dial 54 n instead of 48 p.
Attach the collar to the place next to and just below the 1st collar.
Bant
Twist in a plait 24 cm of blue thread. Make a small bow. Sew to the center of the second collar.
Edward
Right foot
Begin with the base of the right boot and draw a blue 7 thread, put the marker and dial 10 more points = 17 points.
1 purl series
Next. series: arr. face to each loop = 34 p.
Starting with the rel. row knit 9 rows of stocking knit
shaping foot
Next. number: 4 persons, (2 persons.) 9 times, 12 persons = 25 items.
1 purl series
Next. number: 4 persons, (2 persons.) 5 times, 11 persons. = 20
pips . Tear off the blue thread and attach a white thread to the panties.
19 rows of stocking knit.
Tear off the white thread and leave the hinges on the extra spoke.
Left foot
Begin with the base of the left boot and a blue thread to type 10 p., Put the marker and dial another 7 p. = 17 p
. row
Next. series: add facial to each loop = 34 p.
Starting from the purl series, knit 9 rows of stocking stocking We
form the foot:
Next. series: 12 persons, (2 persons.) 8 times, 4 persons = 25 points
. row
Next. number: 11 persons, (2 persons) 5 times, 4 persons = 20 items.
Tear off the blue thread and attach a white thread for pants
19 rows of stocking viscous
Body and head
Mark both ends of the next row
Face outward, continue with white threads and knit 20 loops of the left leg, then 20 loops of the right leg with a spare knitting
pin = 40 pcs . Knit with 11 stock stitching . Tear
off the white thread and attach a light blue for the upper part of the body.
Knit a stocking knit 12 rows, marking the center of one of these rows.
We form the shoulders
Next. number: 6 persons, (2 persons.) 5 times, 8 persons, (2 persons.) 5 times, 6 persons = 30
pcs . Knit with a stocking of 3 rows.
Pull off a light blue and attach a light pink or head color
4 a number of stocking knit
shaping the head
Next. row: (1 persons, increase in the next 2 loops) to the end = 50 p.
Knit with a stocking of 23 rows, marking the center of one of these rows
Form the top of the head
Next. number: 2 persons, (2 persons, 2 persons) to the end = 38 items.
1 purl series
Next. number: 2 persons, (2 persons, 1 person) to the end = 26 p.
Next. number: (2 izn.vm) until the end of n = 13.
Assembly
Connect the ends of the rows of each leg of the marking to dialed loops. Marking at each edge of a series of typed loops is the center of the front of the foot. Starting from the marking, sew the typed loops together, while the seam of the leg will be turned inside the legs. Fill your feet and feet with filler. Sew the seams of the body and head, continuing to fill. Each leg should be 11 cm in circumference, the body - 21 cm at the waist, the head - 24 cm in circumference. Using a thread of color, collect the loops around the 4 rows below the row, where loops for the head were added. Pull off the thread and secure.
In general, the assembly is exactly the same as in Anabel
Face
design Mark the eye positions: 12 rows above the row where additions were made to form the head, 4 stitches between the eyes. A dark brown thread, a tambour seam, starting at the intended position and finishing 2 rows below the mark to sew the eye. Make another swivel stitch in the same place. Repeat the same for the second eye.
Use a pink string to make a mouth. Mark the position of the lower edge of the mouth in the center of the face - 4 rows above the row, where additions were made to form the head. Make 2 small stitches in the shape of V, the lower part of V at the marking. To abuse cheeks.
Hair
spokes 4,5 mm thread of tan color to type 16 loops.
The 1st row is the wrong side.
1st and 2nd row - facial loops.
3rd row: close 2 loops, front to the last 3 loops, turn.
4th row: facial to the end.
5th row: increase in the first 2 loops, face up to the last 5 loops, turn.
6th row: facial to the end.
Repeat these 6 rows 11 times and close the hinges.
Assembling: sew the edges of typed and closed loops together. Collect around a short set of ends of rows, pull and fasten. Place the product on the head of the doll with a seam on the center behind the head. Make sure that one of the wavy ends is located in the center of the forehead. Attach the end to the forehead 3 rows above the eyes. In the center of the back of the head, attach the corrugated end 1.5 cm above the level of the neck. Now attach all the wavy ends to the head, sew.
Lapel shoes (make 2 the same)
Starting at the top edge of the blue thread, dial 28 loops.
To knit 2 rows of stocking knit and close with purl loops.
Sew the ends of the rows of each piece together. Place on the foot and sew on the back.
Sew the edges of the closed loops to the spot, whipping the last tied row of blue shoe. Sew the edges of the typed stitches to the leg.
Buttons
Place a pin in the center of the body in the 7th row below the neck.
Make 2 small stitches for the 1st button, grabbing half a stitch on each side.
Repeat in the 3rd row below the 1st button, then 3 rows below the 2nd button.
Belt
Start at the bottom edge and collect 50 loops with a golden thread.
3 rows of stocking knitted.
Close the hinges.
Sew the ends of the rows together.
Place the belt on the doll with a seam on the center behind, with the edge of the closed loops overlapping the 1st tied light blue row on the upper body.
Sew the edges of typed and closed loops to the place.
Buckle
Blue thread make 4 straight stitches in the center in front.
Upper and lower stitch width - 2 stitches.
Hands (make 2 the same)
Start from the end of the palm and color as for the head to collect 8 loops.
Invalid row.
Track. series: add facial to each loop - 16 loops.
Starting from the purl series, knit stockings 9 rows.
Tear off the thread and insert a light blue thread for the sleeve.
Knit Garter Stitch 2 rows.
Track. number: 3 persons, (added to the next loop, 2 persons) 3 times, add to the next. loop, 3 faces - 20 loops. Starting from the purl series, knit stockings with 13 rows.
Source