50 g of blue yarn and 50 g of white yarn of the same density.
A pair of spokes 4 mm.
Circular knitting needles 4 mm and 40 cm long.
Markers or pins for marks.
Needle and thread are blue for stitching details.
The lower part of the backrest and the gear of the overalls are knitted separately. Then the middle part of the overalls to the armhole is knitted in a circle.
The lower part is transferred.
We start knitting with straight knitting needles from the lower bar. We select a blue thread 19 (21) loops and knit garter stitch 4 rows.
Next row: 3 facial, attach marker, 13 (15) facial, attach marker, 3 facial.
The following series: 3 facial, 13 (15) purl, 3 facial.
In the future, knit 3 loops around the edges of garter stitch, and the rest (middle hinges) with the front surface.
Next row: 3 facial, 1 facial, add 1 loop from the broach, knit the front to 1 loop in front of the marker. Add 1 loop from the broach, 1 facial, 3 facial after the marker.
Next row: 3 facial to marker, all purl between two markers and 3 facial after marker.
Repeat, alternating the last two rows, another 6 (7) times, until there are 33 (37) loops on the spokes.
Extension for legs.
1st row: On the spoke with the loops of the lower part, transfer 7 (9) loops and knit the front to the end of the row. Type another 7 (9) loops. Remove the markers. There will be 47 (55) loops on the spokes.
2nd row: 10 (12) facial, all purlins to the last 10 (12) loops, 10 (12) facial.
3rd row: all facial.
4th row: Repeat the 2nd row.
Do not close the hinges and transfer them to the spare spoke.
Lower backrest.
We start knitting with straight knitting needles from the lower bar. We select a blue thread 19 (21) loops and knit garter stitch 4 rows.
Next row: 3 facial, attach marker, 13 (15) facial, attach marker, 3 facial.
The following series: 3 facial, 13 (15) purl, 3 facial.
Next row: We fasten the buttonholes. 3 facial, 2 together facial, * 1 capitulum, 3 (4) facial. Repeat from * one more time, 2 together face, cape, 4 facial.
In the future, knit 3 loops around the edges of garter stitch, and the rest (middle hinges) with the front surface.
Next row: 3 facial, 1 facial, add 1 loop from the broach, knit with the front to 1 loop in front of the marker, add 1 loop from the broach, 1 facial, 3 facial.
Next row: 3 facial to marker, all purl between two markers and 3 facial after marker.
Repeat, alternating the last two rows, another 10 (11) times, until there are 41 (45) loops on the spokes.
Extension for legs.
1st row: On the spoke with the loops of the lower back, type 4 (6) loops and knit the front to the end of the row. Type another 4 (6) loops. Remove the markers. There will be 49 (57) loops on the spokes.
2nd row: 7 (9) facial, all purlins to the last 7 (9) loops, 7 (9) facial.
3rd row: all facial.
4th row: Repeat the 2nd row.
Do not close the hinges and leave them on the knitting needles.
The main part of overalls.
Circular knitting needles are tied with blue threads, 47 (55) loops of the bottom are transferred from the spare knitting needle, and then 49 (57) loops of the bottom of the back. There are 96 (112) loops on the spokes. Attach the marker to the first lower loop of the gear and knit now in a circle.
Next circle: Knit the front to the marker. Marker move to the next circle, so as not to lose the beginning of the circle .
Next circle: 48 (56) facial, attach the side marker and knit facial until the end of the circle. Continue with the facial surface until the height of the product from the extensions is 12.5 (15) cm.
Go to the blue thread. Spray 1 row of facial and 1 row of purl. This will be the bottom blue bar.
Beginning of the knitting strip with elephants.
Go to the white thread and knit according to the pattern, repeating 8 loops of the ornament 12 (14) times. Continue to knit in a 12-row pattern, then draw 1 row with the front and 1 row with a reverse blue thread to tie off the upper blue stripe.
Go to the blue thread,
Split the backrest and transfer.
Before.
Continue to knit a blue thread with straight knitting needles.
1st row: 48 (56) facial. Leave 48 (56) hinges for the backrest and work only with the first half of the hinges.
2nd row: 6 (7) facial, all purlins to the last 6 (7) loops, 6 (7) loops facing.
3rd row: all the hinges are facial.
4th row: repeat the 2nd row.
The patches.
1st row: close the 3 (4) hinges, knit the front end.
2nd row: close the 3 (4) hinges, all purlins to the last 3 loops, 3 front ones.
3rd row: 3 facial, attach the marker, all facial to the last 3 loops, attach the marker, 3 facial.
4th row: 3 facial, all purlins to the last three loops, 3 facial.
5th row: 3 facial, tie 2 together face-up with a slant to the left (remove one as front to the right knitting needle, remove one as front to the right knitting needle, thread the left knitting needle into two removed and remove them, tie both hinges together as facial behind the back arcs of loops). Knit facial up to 2 loops in front of the marker, 2 together facial, 3 facial.
6th row: 3 facial, all purlins to marker, 3 facial.
Repeat the 5th and 6th row one more time. There will be 38 (44) loops on the spokes.
At the height of the armhole 2.5 (4) cm, begin to tie the neck.
Throat strap.
1st row: 3 facial to marker, 8 (10) facial, attach marker, 16 (18) facial, attach marker, 8 (10) facial to marker, 3 facial after marker.
2nd row: 3 facial, 8 (10) purl, 16 (18) facial, 8 (10) purl, 3 facial.
3rd row: all facial.
4th row: repeat the 2nd row.
Neck.
1st row: 14 (16) facial, remove the markers and attach the second coil of yarn. Close the center 10 (12) hinges. Knit to the end of 14 (16) loops facing.
2nd row: From the first tangle, bind 3 facial, attach a marker, 8 (10) of the back, attach a marker, 3 facial; from the second coil, bind 3 facial, attach a marker, 8 (10) of the wrong, attach a marker, 3 facial.
3rd row: 3 facial, knit facial up to 2 loops in front of marker, 2 together facial, 3 facial after marker. From the second tangle, knit 3 facial, 2 together facial with a slant to the left (remove one as the front to the right needle, remove one as the front to the right knitting needle, pass the left knitting needle into the two removed and remove them, tie both hinges together as facial behind the hinges of the hinges ). Insert facial until marker, 3 facial after marker.
4th row: 3 facial, knit with purl to the marker, 3 facial. From the second coil 3 facial, knit purl to the marker, 3 facial.
Repeat the 3rd and 4th rows 3 more times and knit to the height of the armhole 10 (11.5) cm. You will have 10 (12) loops on each side. Tie another 4 rows of garter stitch on both straps.
Back.
Knit as well as before before the height of the armhole 4 (5) cm. At this altitude, begin to tie the neck as well as the transfer neck. Continue to knit both sides of the back to the height of the armhole 12 (13.5) cm.
Tie two straps on each strap. For this, knit like this:
1st row: 3 facial, 1 capitulum, 2 together facial, 0 (2) facial, 2 together facial, 1 capitulum, 3 facial. From the second coil - 3 facial, 1 capitulum, 2 together facial, 0 (2) facial, 2 together facial, 1 capitulum, 3 facial.
2nd row: 3 facial, 4 (6) purl, 3 facial. From the second coil: 3 facial, 4 (6) purl, 3 facial.
Tie another 4 rows of garter stitch.
Close the hinges. Gently sew on the sides of the bar on the armholes and on the cuts for the legs.