• Hook under your yarn.
hairstyles.
The doll in the finished form was 20 cm.
clothes - acrylic, hook № 1.75.
• (6) - the number of loops that should be obtained in this row.
BODY HEAD AND HEAD OF ONE
DETAILS
You can fill your body and head as you go
knitting, and then, when the part will be connected.
In the trunk-neck-head in the center we insert
holder (3 cotton buds wrap with tape).
I did the whole assembly when the parts were connected.
Torso:
1 row: white yarn (panties or panties)
dial in the ring amigurumi 6 сбн (6)
2nd row: Addition - 6 times (12)
3 ranks: Addition - 12 times (24)
4 row: (increase, 3 sc) - 6 times (30)
5-6 row: 30 sb (30).
7 row: we knit with the "walking step" rubbery panties (panties). We change the thread to the thread of the color of the clothes. We continue knitting in the usual
direction.
8 row: decrease, 28 sb (29)
9th row: 9 sb, decrease, 18 sbn (28). When assembling in this row, perform a tightening of the cape.
10th row: 28 sb (28).
11 series: 18 scales, decrease, 8 scales (27)
12th row: 27 sb for the rear wall (27). By the line that turns out in this
row we will type the loop of the skirt.
13th row: 27 sbn (27).
14th row: (reduction, 7 sc.) - 3 times (24).
15 series: (decrease, 6 scf) - 3 times (21)
16th row: (decrease, 5 sc.) - 3 times (18)
17 series: (decrease, 1 sb) - 6 times. Change the thread to a skin color string.
18 row: Decrease - 6 times (6).
Head: 19 row: 6 sb (6) 20 row: increase - 6 times (12). 21 series: increase - 12 times (24). If the body is stuffed during the mating process, you can insert a holder of cotton buds at this point. 22 series: (increase, 3 sc.) - 6 times (30). 23 series: (increase, 4 sbn) - 6 times (36) 24 series: (increase, 5 sb) - 6 times (42) 25 row: (increase, 6 sc) - 6 times (48) 26 row: (increase , 7 сбн) - 6 times (54) 27 series: (increase, 8 сбн) - 6 times (60) 28-35 series: 60 сбн (60). 36 rows: (9 sb, decrease, 9 sb) - 3 times (57) 37 row: (decrease, 17 sb) - 3 times (54) 38 row: (decrease, 7 scroll) - 6 times (48) 39 row : (3 sb, decrease, 3 sc) - 6 times (42) 40 row: (decrease, 5 sc) - 6 times (36)
41 series: (2 sb, decrease, 2 sc) - 6 times (30)
42 series: (reduction, 3 sc.) - 6 times (24). Fill your head.
43 row: (decrease, 2 sc) - 6 times (18)
44 row: (decrease, 1 sc) - 6 times (12)
45 row: Decrease - 6 times (6). When the body is full and the holder is inserted
neck, the remaining 6 stitches pull, thread secure, cut. Tip hiding
inside the body.
HANDS (2 pieces) (about 8-9 cm)
We begin to knit a thread of flesh-colored color.
Type 3 loops in an amigurumi ring (3)
1 row: an increase in each loop (6)
2nd row: 6 sb (6).
We knit a thumb: 3 in, half-finger
in the 2nd and 3rd loops. We return to the beginning
vy-zaniya.
3-18 series: 6 sbn (6). Fill your hand and
pull off the hinges. You can tie the sleeve in the process of knitting the hand, changing
thread of the corresponding color.
HANDS-LIGHTS (2 parts):
In the ring amigurumi dial 6 loops.
1 row: increases from ssn into each loop (12)
2 series: (increase from ssn, 2 in, 1 ssn) - 6 times (18)
3rd row: 18 cc (18)
4 ranks: (reduction of sb, 1 sb) - 6 times (12)
5 ranks: (reduction of sb, 1 sbn) - 4 times (8).
At the edge of the sleeve, tie the harness in any way to another
contrast color.
Sew the sleeves to the top of the handles. You can also begin to bind
The flashlight sleeves in the opposite direction: starting from the last row of the hand in the
side of the elbow. Then we pull all the loops and sew the handle to the body.
If you knit a doll dress, which will be worn from above, the sleeves
knit, as usual, around the armhole.
In general, the fantasy works.
LEGS (2 pieces)
Determine whether the legs in golf, in breeches, pantyhose or bare -
choose the thread of the corresponding color.
In our case, the pupa has white breeches. Begin to knit a thread
flesh color.
1 row: we enter 6 loops into the amigurumi ring.
2nd row: (increment in each loop) - (12).
3-5 rows: 12 sb (12)
6 row: (decrease, 2 sc) - 3 times (9)
7- 12 row: 9 sb (9). Change the thread to white.
13- 24: 9 sb. Fit the knife.
25 series: decreases, loops tighten, thread secure and cut off. Tip hiding
inside the leg.
For stability, you can insert a wire (measure the length of 2x legs +
1.5 cm across the trunk; insert into the trunk in the place of attachment of the legs,
turn off at the ends of non-large ovals for the feet, insert into
legs, stuff them to the end and tighten the top). Sew feet to
the trunk will be a threaded attachment - the doll will be able to stand and sit, legs
They will freely rotate in the places of attachment to the body.
TROUSERS (2 pieces)
Type a chain of 8 items. Knitting
continue the second from the hook
loop (7n). After each row
make the connecting bar in
first loop and start a new series in
first loop. Be sure to mark
the beginning of the series with a pin or a marker.
1 row: an increase, 5 sb, 4 sbn in one
loop. Turn knitting and
continue on the other side of the chain: 5 sb, an increase (18).
2nd row: (1 sb, increase, 5 sb, increase, 1 sb) - 2 times (22).
3 rd: 22 sb for the rear walls (22).
4 row: 20 sb for the rear walls (20). With 21 loops begin to knit the back
shoes:
5 row (start with 21 loops): 2 sb, sb in the connecting loop 4 rows, 2
sbn, 1 in, turn knitting (5).
6 row: 5 sb, 8 in, fix and tear off the thread. From the chain of air loops
then we will form the straps of the shoe.
TROUSER'S MOUSE:
7th row: connecting column in the 5th loop, 1 in. Start in the 5th loop: 14
sbn, 1 in, knitting turn (14).
8th row: 14 sb, turn, without adding Bp (14).
9 row: skip the 1st and 2nd loops, psn in the 3rd loop, (skip 1 pt, psn) -
repeat 2 times, psn, (skip 1 pt, psn) - 3 times, sbn, rotate, do not
adding Bn (7).
10 series: (skip 1 loop, cbn) - 3 times, cb, turn, without adding cp (4).
11 series: to skip 3 loops, sbn, chain of 8 in, fix and tear the thread,
leaving a tip of 10 cm (in case the shoe is wide on the stalk,
we will drag the shoe with this ni-point).
Collapse the chain of the toe's toe in half and sew to the top of the shoe.
Cut out the insole from the cardboard or felt, so that the sole is tight.
Insert the leg into the shoe, pass the chain of the back of the shoe into the folded
in half a chain of toe, fasten on the side
SKIRT (the item is not removable)
We find on the body the 12th row, where the knitting for the back wall went.
1 row: By the received loop we knit 27 sb.
2 series: increases from ssn into each loop (54).
3rd row (white thread): 54 cbms (54).
4 rows (colored thread): 3 inches of lifting, 53 cms (54).
5 row (white thread): 54 sb (54)
6th row (colored thread): 3 inches of lift, ssn in the same loop, 5 cms, (an increase from
ssn, 5 csn) - to echo to the end of the series.
7 row (white thread): tie the bottom of the skirt with any lace pattern or
"Step by step". Cut the thread and put it into the product.
ASSEMBLY
1) stuff the body and head.
2) stuffing knobs and legs, attach to the body thread attachment
(limbs will be mobile). At will before sewing in hands and
legs insert the wire, passing it through the body and curling the oval in
palms and feet). I did not insert a wire.
EYES:
We share by a thread loop
head to left and right
halves. For this, the
it will be convenient to determine
peephole arrangement and contour
hairstyles. Count from loop 4 p.
left and right (distance 8 loops)
- this is the point of location
eye horizontally.
Vertically there are 3 vertical loops between the eyes. We embroider eyes with two
"Strokes" with a black thread. Thick "strokes" look bad.
HAIR:
1 way: sew the tracks from the wig to the head in this order: 1) bangs; 2)
the back part (photo), 3) the side.
2 hair thread: It is better to take a thicker yarn. cut the length of 20-30
cm, folded in half. Fasten them along the contour to each loop as fringe
scarf. Weave braids, tails (to your liking).
Pupa is ready!