Click For Crochet Abbreviations List
DIMENSIONS
S (M) L (XL)
YOU WILL BE REQUIRED
Yarn (100% wool, 50 g / 100 m) - 7 (8) 9 (10) coils of black, 14 (15) 16 (17) coils of white; hook number 3,5, 4 and 4,5; 4 buttons with a diameter of 20 mm.
PATTERNS AND SCHEMES
FORMATION OF THE HOSE
At the beginning of the series tie the connection. Art. those loops that need to be closed, and start a new row; At the end of the row, those loops that need to be closed, left unbound and turn.
Attention!
If at one step you need to reduce only 1 point, after / in front of the edge loop 2 unfinished art. c / n, connected together.
MAIN PATTERN
Knit by the scheme.
DENSITY OF ABRASION
20 tbsp. с / н х 10 р. = 10 x 10 cm, connected by hook # 4.
ATTENTION!
The density of knitting must match the preset! Therefore, before you begin to work, you must associate the pattern pattern: perform an initial chain of 28 bp. and bind 11 r. Art. with / n. Then count the loops on the middle section of the sample 10 cm long: if there are more than 20 loops on this segment, change the hook to a thicker one, if smaller - to a thinner one. The main thing is that the density of your knitting corresponds to a given density in width. Knit the product with the same crochet as the sample.
If the instruction specifies only one number, it applies to all sizes.
The product is knitted with two threads. When changing colors, the last 2 sts on the hook when performing art. c / n a new thread.
COMPLETING OF THE WORK
BACK and STRIPS
Knit to the armhole with a single cloth.
Hook No. 4,5, perform a white thread of 1 st and connect the initial chain of 185 (205) 225 (245)
Go to hook number 4, using 3 cp. lift and turn back and knit in the opposite direction with the main pattern according to the scheme, carrying out 1 st. с / н in each в.п. = 185 (205) 225 (245) art. с / н (including 3 в.п.).
Continue to knit with a pattern, each row starting at 3 cp. lifting instead of the 1st st. s / n, carrying out on 1 tbsp. s / n in each art. s / n and ending with a series of 1 tbsp. s / n in the 3rd c. lifting the previous row. At an altitude of 22 cm perform "slotted" pockets.
"PROPRESSED" POCKETS
Identify the pattern fragment for the burlap pocket so that it "fits" into the shelf pattern. To do this, count 13 points on each side and make a mark (= upper corner), count 20 p. down and note the bottom corner, then count the next 37 items and accordingly mark the bottom and top corners on the second side. Knit crochet number 4.
Execute 1 loop and connect the initial chain of 37 bp, rotate with 3 bp. lifting and knit in the opposite direction the main pattern (according to the selected fragment), performing 1 st. с / н in each в.п.
Having connected in height to 20 r. for each sacking, include them in a row instead of loops of the designated fragments.
When the length of the product is 45 (46) 47 (48) cm, separate the loops so that the backrest and the shelves are finished separately.
BACK
Knit on medium 93 (103) 113 (123) art. with / n. In the middle of the back, make a mark and continue to knit with the main pattern.
When the height of the armhole from the mark is 20 (21) 22 (23) cm, begin to form the neck. To do this, the average 21 (23) 23 (25) points should be left unbound and both sides must be completed separately.
To round the neck from the inner edge, in each row 1 time 2 points and 1 time 3 points should be subtracted = 31 (35) 40 (44) shoulders of the shoulder remain.
With the height of the armhole 23 (24) 25 (26) cm, the work is finished.
RIGHT STICK
Knit at the extreme 46 (51) 56 (61) n.
When you will tie the last 12 cm to the shoulder edge (check on the back), start forming the neck.
In each row, subtract 6, 3, 2, 2, 1, 1, (6, 3, 3, 2, 1, 1) from the inner edge 6, 3, 3, 2, 1, 1 (6, 4, 3 , 2, 1, 1) n. = 31 (35) 40 (44) n. Of the shoulder remain.
After tying up the back edge of the shoulder edge, the work is finished.
LEFT STICK
Knit, like the right shelf, but in a mirror image.
SLEEVES
Hook No. 4,5 to make a white thread 1 loop and connect the initial chain of 69 (73) 77 (81)
Go to hook number 4, rotate with 3 cp. lifting and knitting in the opposite direction according to the scheme = 69 (73) 77 (81) st. s / n (including 3 bp instead of the 1st st. s / n).
After 10 (11) 12 (13) cm, add 1 pt on each side (= after / in front of the edge loop, 2 sts per second). These increases should be repeated in each 3rd river until the number of loops increases to 87 (91) 95 (99) st. s / n (the increments are performed both from the front and from the underside of the product), the added loops are included in the main pattern.
When the length of the sleeve is 37 (38) 39 (40) cm, the work is finished.
ASSEMBLY
Perform shoulder seams and seams of sleeves. Sew up sleeves.
Tie the neck: hook number 4 black thread first tie the neck next to the connection. st., to get a smooth edge (not tightened and not stretched!), and the thread to break. Then knit:
1 st row: 1 tbsp. б / н in each соед. Art.
2-nd row: rotate with the help of the 1st st. for lifting and perform 1 st. b / n in each
Art. b / n.
Repeat the 2nd step until the width of the strap is about 1 cm.
The fasteners of the fastener, the edges of the sleeves and the bottom edge: hook the number 4 with a black thread, first tie a string together. then knit in the same way as described for the neck.
Entrances to the pockets: by crochet No.3.5 with a black thread, first tie the edge next to the connector. then knit in the same way as described for the neck. Secure the ends of the entrances to the pockets. Sew a burlap.
Sew off the buttons. Bind hinges for buttons, evenly distributing them on the right lath of the fastener.
The magazine "Burda. Creazion »№3 / 2016