Click For Crochet Abbreviations List

Bakey of this classic cardigan made on the needles, and the main canvas crocheted simple pattern of semi-columns.

DIMENSIONS

S (M) L (XL)

 

BREAST COUPLING PRODUCT WIDTH

Approximately 98 (105) 112 (119) cm + front plates 
 

LENGTH OF THE PRODUCT

Approximately 63 (64) 65 (66) cm 

You will need: yarn (55% wool, 45% cotton; 50 g / 124 m) - 10 (11) 12 (13) skeins of white, 2 (2) 3 (3) skeins dark blue; circular needles number 3 with a length of 80 cm; hook number 4.5 and 5.5. 
 

PATTERNS

 

MAIN PATTERN

1st row: turn using 2 ip lifting and perform on 1 p / st. in every century 

2nd row: turn using 2 ip lifting and perform on 1 p / st. in each p / st. 

Repeat these 2 rows. 
 

Important!

Turn from row to row to perform using 2 vp lifting that replace 1 p / st. (in instruction 2 ce lifting are designated as p / st). 
 

FORMATION OF THE MOUTH AND RANGE

At the beginning of the number of the number of loops that you want to close, tie the connection. Art. and start a new series. At the end of the row, the number of loops that must be closed, left untied and rotated. 
 

The board

If it is necessary to close only 1 section, after / before the edge loop, you can perform 2 unfinished p / st., Connected together. 
 

ELASTIC

Knit alternately 2 out., 2 persons.
 

KNITTING DENSITY

17 p / art. x 15 p. = 10 x 10 cm, connected by the main crochet pattern No. 4.5. 
 

ATTENTION!

It is important that the knitting density matches the given, and above all - in width. If the instruction contains only one number, then it applies to all sizes.
 

COMPLETING OF THE WORK

 

BACK AND SHELLS

Knit a single web. 

Using hook number 5.5, use a white thread to start the initial loop and tie a chain of 167 (179) 191 (203) inc. 

Go to the hook number 4.5 and continue to work the main pattern = 167 (179) 191 (203) n / st. 

At the same time, make strips, changing the colors of the threads in the following sequence: * 16 p. whites, 1 p. dark blue, 1 p. white, 1 p. dark blue, 1 p. white, 1 p. dark blue *, repeat from * to * until the end of work. 

When the length of the product is 41 cm, the loops are divided and first of all on the middle 79 (85) 91 (97) paragraph. Continue knitting the back. 

At the beginning of the separate knitting, make on both sides of the label and close on both sides for the armholes (see above), 2, 2 points, then perform the reductions: 2 points, 2 points / second. in 1 p / st., knit to the last 3 p. on the needle, 2 p / st. in 1 p / st., 1 p. These reductions are to be repeated in each row - just complete 7 (8) 9 (10) rows with decrements = 57 (61) 65 (69) p / st. 

When the height of the armholes from the marks is 19 (20) 21 (22) cm, close the loop for the neck: leave the middle 19 (21) 21 (23) points unbound and finish both sides separately. 

To round the neck close in the next row from the inner edge 2 p., Simultaneously from the outer edge close for the shoulder 8, 9 (9, 9) 10, 10 (10, 11) p.  

Finish the second side symmetrically. 
 

RIGHT SHELL

Knit on the extreme 44 (47) 50 (53) p.  

For an armhole, close the loop and perform a decrease, as on the back = 33 (35) 37 (39) p 

will remain .  When you leave the last 12 cm to the shoulder edge (check back) , for rounding the neck, first close 7, 4, 3, 2 p., then perform a decrease, as described for the armhole = 17 (18) 20 (21) p. shoulder remains. 

Having tied up to the 1st closure of the hinges for the shoulder bevel (check over the back), finish the same. 
 

LEFT SHOT

Knit as the right shelf, but in a mirror image. 
 

SLEEVES

Using hook number 5.5, use a white thread to start the initial loop and tie a chain of 61 (65) 69 (73) inc. 

Go to the hook number 4.5 and continue to work the main pattern = 61 (65) 69 (73) n / st. 

When the sleeve is about 28 cm long (stripes finish, as on the back / shelves), first close 3, 2 p. On both sides, then decrease (as on the back) 2 times at the beginning and at the end of each 2nd row , then in each row, until 25 p / st. 

Finish the formation of okat, closing 2, 2, 3 loops on both sides. 
 

POCKETS (2 DETAILS)

Using hook number 5.5, use a white thread to start the initial loop and tie a chain of 25 (27) 27 (29) ce 

Go to the hook number 4.5 and continue to work the main pattern = 25 (27) 27 (29) n / st. 

When the pocket is 14–15 cm long, finish the job.
 

ASSEMBLY

Run shoulder seams and sleeve seams. 

Tie the edges of the product with white thread on the circular needles No. 3 in rows in the forward and reverse directions. For this loop to dial evenly from the front of the product (thread at work). 
 

Bake

At the edge of the neckline, dial around 148 (152) 152 (156) points for the bake (approximately 3 points for every 2 points or 2 rubles). 

Knit a rubber band: persons. chrome., * 2 out., 2 persons. *, repeat from * to *, finish a row of 2 out., persons. chrome In all subsequent rows of the loop knit on the picture. 

When the width of the gauge is 3–3.5 cm, close the loop by the pattern. 

The bottom edge of the product, the edges of the pockets. 
Dial 2 items from each loop (the number of loops should be a multiple of 4) and knit like a stripe. 
 

FRONT BALLS

Dial 2 points for hemming, then 8–9 points along the edge of the lower bar into the gum, then 2 points from each row, finish 8–9 points along the edge of the sheet and another 2 points for hem (the number of loops should be a multiple of 4 + 2). Newly assembled loops in all rows knit facial, on the rest to knit with an elastic band. 

Tie a rubber band 3–3.5 cm and close the loop on the picture. 
 

SLEEVE EDGE

Dial 3 points out of every 2 points (the number of loops must be a multiple of 4 + 2 points). Knit with a rubber band, tie 3–3.5 cm and close the loop by the pattern. 

Run the seams of the sleeves. Sew sleeves. To sew pockets, as in the photo. 

Photo: magazine “Burda. Creazion »№2 / 2017