FACIAL IRON
Front rows - front loops, purl rows - purl loops.
PATENT EDGE (ON 3 LOOPS)
Tie 3 loops in the front row of the front loops; in the purse row, remove the 3 loops as purl, while stretching the thread before work and tighten.
SEQUENCE OF PATTERNS
40 rows with a rhombus pattern,
22 rows with a front satin stitch,
40 rows with a rhomb pattern,
56 (6) rows with a front satin stitch = a total of 158 (108) rows. Figures in brackets refer to sleeves.
KNITTING DENSITY
20 p. X 26 p. = 10 x 10 cm;
patent edge (3 p.) 3 p. = width 1.5 cm.
Pattern
COMPLETING OF THE WORK
BACK
On the needles No. 4, dial 99 (123) loops with a cross-shaped set and tie a 3.5 cm elastic band for the slat.
Continue work on the needles №4,5 agreed sequences of patterns.
After 61 cm = 158 rows from the plank, close the outer 30 (42) points for the shoulders, leave the middle 39 points for the hood.
LEFT SHOT
On knitting needles No. 4, dial 53 (65) loops with a cross set and, for a slat, tie 3.5 cm as follows: edgeband, 49 (61) section with an elastic band, 3 section with a patent edge.
Continue work on the needles No. 4, 5 as follows: edging, 49 (61) n. Acc. sequences of patterns, 3 s. with a patent edge, with a diamond pattern for size 2 finish with loops up to arrow A.
After 61 cm = 158 rows from the bar, close the outer 30 (42) s for shoulders and leave the remaining 23 s. for the hood.
RIGHT SHELL
Knit the same as the left shelf, but in a mirror image, while for the 2nd size, start the pattern of rhombuses with loops from the arrow B.
SLEEVES
Dial on the needles No. 4 for each sleeve by 51 loops with a cross-shaped set and tie the strap like on the back.
Continue work on the needles №4,5 agreed sequences of patterns.
At the same time, add 1 x 1 section for the bevel of the sleeves on both sides in the next 4th row, then 12 x 1 in each 8th row (then alternately in each 4th and 6th row 20 x 1 p.) acc. pattern = 77 (93) p.
Through 41.5 cm = 108 rows from the plank, close all the loops.
HOOD
Run shoulder seams. Left on 23 loops of the shelves, as well as 39 loops of the backrest, type on the circular needles and knit on all 85 loops as follows: 3 p. By the patent edge, 79 by the front satin stitch, 3 by the patent edge.
At the same time, in the 1st row, mark the middle 3 loops and, for shaping, knit on both sides of the marked loops in each 4th row from the beginning of the 9 x 1 knitting of the hood, the front one crossed from the transverse thread = 103 p.
Through 24.5 cm = 64 from the start of knitting the knit row, knit both last loops in front of the marked loops together on the front row, and knit together the first loops after the marked loops together on the front one with a tilt to the left (= 1 remove the front loop as the front one, then pull it through the removed loop) . Repeat these reductions 9 more times in every 2nd row = 83 p.
After 32.5 cm = 84 rows from the beginning of the knitting of the hood, close all the loops.
Fold the hood in half with the front side facing inwards and make the upper seam of the hood.
ASSEMBLY
Sew the sleeves, complete the side seams and the seams of the sleeves.
Photo: magazine "Sabrina" №7 / 2017