Click For Crochet Abbreviations List
You will need:
- flesh yarn,
- yarn (small hanks) for hair and clothing,
- hook,
- filler for toys (holofayber),
- stitching needle,
- plastic eyes for dolls,
- beads or other decorative elements.
Abbreviations used in the description:
at. etc. - an air loop
sbn - a column without a crochet
pst - a half-cube with a crochet
ssn - a column with a cake
cs4n - a column with four crochets
cc - a connecting post
Addition from one loop - we unfasten two bars
Decrease - we tie two bars together (with a common vertex)
Head:
We knit yarns of corporal color.
1 row: 6 sb in the ring amigurumi
2 ranks: 6 additions (12)
3 ranks: (sb, add) 6 times (18)
4 ranks: (2 sb, increase) 6 times (24)
5 ranks: (3 sbn, increase 6 times (30)
6 row: (4 rolls, increase) 6 times (36)
7 row: (5 rolls, increase) 6 times (42)
8 row: (6 rolls, increase) 6 times (48)
9 series: (7 sb, increase) 6 times (54)
10 series: (8 sb, increase) 6 times (60)
11- 23 series: 60 sb
24 series: (8 scales, decrease) 6 times (54)
25 series : (7 сбн, убавка) 6 times (48)
26 row: (6 сбн, убавка) 6 times (42)
27 row: (5 сбн, убавка) 6 times (36)
28 серия: (4 сбн, убавка) 6 times (30)
29 row: (3 scales, decrease) 6 times (24)
30 row: (2 sb, decrease) 6 times (18)
31 row: (1 sb, decrease) 6 times (12)
After the head is connected, we stuff it and we make a duck in the eye area.
The tightening can be done with a thin thread of flesh-colored color. Insert the needle from below into the unshielded hole in the head and bring it outward in the center (approximately between 16-17 near the top of the head), then through the row we bring the needle back inside the head, tighten and tighten the knot a "dimple" was formed. Bring the needle out at the place of the second eye (through 9 loops approximately) and through the row again tightened inside, knotted knot. Cut off the excess thread, put the tips of the threads inside the head in the packing.
Pull a hole in the head and pull the tail of the thread.
Body:
Since the doll we will have as if in a sarafan and blouse, then we begin to knit the body with the color that was chosen for the blouse.
1 row: 6 sb in the ring amigurumi
2 ranks: 6 additions (12)
3 ranks: (sb, increase) 6 times (18)
4-5 row: 18 sb
6 row: (2 roll, increase) 6 times (24)
7 row: 24 sb
8 row: (3 scales, increase) 6 times (30)
9 row: 30 sb
10 row: (4 rolls, increase) 6 times (36)
11 row: 36 sb 12 row: (5 sbn, increase) 6 times (42)
13-14 series: 42 sbn 15 row: (6 scales, increase) 6 times (48)
16 row: 48 sb 17 row: (7 sb, increase) 6 times (54)
18 rows: 54 sb.
We change the color of the thread and take the color that the trousers will knit.
19 series: 54 sbn
20 row: (8 rolls, increase) 6 times (60)
21 row: 60 sb
22 row: (4 sb, decrease) 10 times (50)
23 row: (3 sb, decrease) 10 times (40)
24 ranks: (2 scales, decrease) 10 times (30)
25 row: (4 sb, decrease) 5 times (24)
26 row: (3 scales, decrease) 5 times (20)
27 row: (2 scales, decrease) 5 times (16)
28 row: decrease 8 times
Fill the body, tighten and the tail of the thread is hidden inside.
Arms:
Hands knit from the palm, knitting of flesh yarn begins.
1 row: 6 sb in the ring amigurumi
2 row: 6 additions (12)
3 row: (sb, add) 6 times (18)
4 5 row: 18 sb
6 row: (7 sb, decrease) 2 times (16)
7 range: 16 sc
in the eighth row knit finger:
8 number 6 sc, 4 CCH one vertex in trace loop 9 sc
row 9: (6 sc, ubavka) 2 times (14)
10 number: 14 sc
11 series ( 5 сбн, убавка) 2 times (12)
Change the color of the thread, to the color that was chosen for the blouse.
12 row: 12 sb
13 row: 12 sb for the back wall of the loop
13 21 row: 12 sb, leave a long tail of the thread so that you can sew the handle and sew it to the body.
Fill the handle with filler. The cam should be filled sufficiently tightly, the handle itself can be made softer. Now put the top of the handle flat and tie the edge.
It remains to tie the ruffle on the sleeve. In the place where the hinges (13th row) were knitted behind the back of the loop (13 row), attach the thread (the color of the blouse) and for the remaining loose front walls of the loop knit a ruchet: 3 bp, 1 sb. Hook the thread of the thread inside the handle.
Similarly, tie the second handle to the doll.
Feet:
For the feet, you first need to tie the foot in the toe, and then the foot itself.
Stop:
1 row: 6 sb in the ring amigurumi
2 ranks: 6 additions (12)
3 ranks: (sb, increase) 6 times (18)
4 ranks: (2 rolls, increase) 6 times (24)
5 ranks: (3 (30)
6 -11 series: 30 sb
12 series: (13 sb, decrease) 2 times (28)
13 row: 28 sb 14 row: (12 sb, decrease) 2 times (26)
15 series: 26 sbn
16 series: (11 sb, decrease) 2 times (24)
17 row: 24 sb
18 row: (10 sb, decrease) 2 times (22)
19 row: 22 sb
20 row: (9 sb, ) 2 times (20),
Fill the foot tightly.
21 rows: (decrease) 6 times, remove the hole and hide the tip of the thread.
Now around the foot at the point of narrowing, circle 15 loops (the color of the old socks).
Knit the top of the socks:
1 6 row: 15 sb
Change the thread color to a solid one and then knit the doll leg.
7 row: 15 sb for the rear wall of the loop
8 19 row: 15 sb
Change the thread color to the one chosen for the pantaloons.
20 row: 15 sb for the rear wall of the loop
21 row: (4 sb, increase) 3 times (18)
22-25 row: 18 sb.
Fold the top of the leg and tie the flat edge (like at the hands).
Make a rush (3 bp, 1 sb) with the color of the socks in the 7th row (where they knit behind the back). Also make a ruffle in the 20 series in the color of the pantaloons.
Shoes:
Tie the sole according to the scheme.
Further:
5 ranks: 43 sb for the back wall of the loop
6-9 row: 43 sb
10 row: 8 sb, 2 pst, 8 pst, 2 pst, 15 sb (35)
11 ranks: 8 sb, 12 pst, 15 sb )
12 row: 8 sb, 2 pst, 4 pst, 2 pst, 9 sb, 3 sb slips (28)
Put the shoe on the leg, attach the thread from the side. Next, knit 8 bp, join the connecting column on the other side of the shoe, turn knitting and tie 8 sts strap. Fasten the thread and hide the tails. Similarly, tie the second shoe.
Nose:
Knit the flesh yarn.
1 row: 6 sb in the ring amigurumi
2 row: 6 sb
Leave enough to sew the tip and sew a nose on the face.
Ears:
Knit the flesh yarn. At the eye level, retreat 9 sb, attach. Further 3 in. ascent, 8 ссн.
Pull the thread of the thread 2 rows higher (below) behind the eye, the tail of the thread that remained from attaching the thread at the beginning of the knitting of the ear hook on the third ct. lift and output in the same place as the tail. Tie the tips into a knot and hide it inside the head. repeat for the second ear.
Dress:
For the coquette, type 26 in. item
1 row: 1 century. ascent, 25 sb.
2nd row: 6th century. ascent, 5 cc4n, 2 c. n., 10 cc4n, 2 c. n., 6 сс4н
3 ranks: 1 in. lifting, 25 sb
Next, tie the skirt according to the scheme:
For the hair, cut the thread of the desired length (depending on the desired length of hair). Then fasten each thread around the crown. Move in circular rows from the top of the head to the sides.
To fix the filament-thread, enter the hook towards the crown, fold the thread in half and hook it by the middle and stretch it out. Then pick up both ends of the thread and pull them through the loop. Tighten.
Now it remains to "assemble" the doll. Put on a dress, sew the head to the body, also hands and feet. Sew your hands between 4-5 near the body, and legs between 22-23.