Threads for the body of herons, you can any thin mohair, but not very fluffy, I knitted Mohair Classic, beige color composition 70% mohair, 30 acrylic, 100gr = 600m, one thread.
Threads for feathers - "Fox", 56% nylon, 44% of the poet, 90m = 100gr, color - 005
Wire for body frame and wings.
Scissors, glue, needle for stapling parts.
Filler.
Dry pastel for toning.
37r. (5cb, yb.) X5p., 1cbn (31)
the part that will be in the trunk should be in the form of a loop along the size of the trunk, we leave the end of the wire more truly, then insert it into the head, fill it tightly with filler.
39 row: (5 sc, pr) x 5 times, 1 SBN (36)
40-53 row: 36 SBN
54 row: (5 sc, уб) х 5 times, 1сбн (31)
Row: 29СБН, Уб. (thirty)
56 row: ubh15raz (15) 57 row: 15SBN
do not stuff your neck. 58-79Lands: 15SBN
80 row: (pr, 4СБН) х3раза (18) 81-84order: 18СБН
Cut the thread, leaving a short length for sewing.
HEAD***
1 row: in the ring amigurumi 5SBN (5) 2 series: (pr) x 5 times (10)
3 row: (pr, 1SBN) x 5 times (15)
4 row: (pr, 2SBN) x 5 times (20)
5 row: (pr, 3SBN) x 5 times (25)
6-7 series: 25 SBN (25)
8 row: (pr, 4SBN) x 5 times (30)
9 row: (pr, 5PSN) x 5 times (35)
10th row: (pr, 6SBN) x 5 times (40)
11th row: (pr, 7SBN) x 5 times (45)
12-20 series: 45 sc (45)
21 ranks: 21 sc, 2 ep, skip 2 sc, 22 sc, put another marker on 2vp
22 series: 21СБН, 2СБН по 2ВП, 22СБН
23 row: 45 SBN
24 row: (уб, 7СБН) х 5 times (40)
25 row: (уб, 6СБН) х 5 times (35)
We put off knitting.
Get a big hole, then we'll insert the head of the frog.
SHEARS
1 row: into the ring am.5SBN (5)
2 row: (pr) x 5 times (10)
3 row: (pr, 1SBN) x 5 times (15)
4 row: (pr, 2SBN) x 5 times (20)
5-8days: 20SBN
Leave the thread for sewing.
LOOSE A FILLER A LITTLE AND PREPARE THE SHCHECH IN THE NECESSARY PLACE.
Beaver-upper part ***
1 row: 4bn in ring ami
2 row: prx4raza (8)
3-15 row: 8 SBN
16 row: pr, 4SBN, pr, 2SBN
17-21days: 10 SBN
22 row: pr, 5SBN, pr, 3SBN
23-25days: 12sbn
26 row: pr, 6SBN, pr, 4SBN
27 row: 14СБН
28 rd: pr, 7SBN, pr, 5SBN
29-37Reports: 16SBN
38 row: (3sbn, pr) x 4 times (= 20)
39 row: 20 SBN
40 row: (4sbn, pr) x 4 times (= 24)
41 row: 24 SBN
42 row: (3sbn, pr) x 6 times (= 30)
43 series: 30 SBN
44 series: (4сбн, пр) х6раз (= 36)
45 row: 36 SBN
46 row: (5sbn, pr) x6raz (= 42)
Row: 42 SBN
48 row: 42 SBN
49 row: 42 SBN
50 row: 42 SBN
We make a wire frame for the beak-2 pieces, for the upper part of the beak and for the bottom.
We take three pieces of wire, at the beginning we fasten it with an adhesive plaster, then insert the frame into the beak, fold the beak in half, and sew stitches with 1 wire
then add the canvas so that the scar of the beak was exactly in the middle
upper part of the beak, we tie both sides of the SBN beak together.
We leave the thread for sewing.
KLUV - lower part ***
1 row: 4 fold rings.
2 row: prx4raza (8)
3-10 row: 8 СБН
11 row: pr, 4SBN, pr, 2SBN
12-16days: 10 SBN
17 row: pr, 5SBN, pr, 3SBN
18-20days: 12sbn
21 row: pr, 6SBN, pr, 4SBN
Row: 14СБН
23 rd: pr, 7SBN, pr, 5SBN
24-32ps: 16SBN
Row: (3sbn, pr) x 4 times (= 20)
34 row: 20 SBN
35 row: (4sbn, pr) x 4 times (= 24)
36th row: 24SBN
37 row: (3sbn, pr) x 6 times (= 30)
38 series: 30 SBN
39 series: (4sbn, pr) x6raz (= 36)
40 row: 36 SBN
41 row: (5sbn, pr) x6raz (= 42)
42 row: 42 SBN
43 row: 42 SBN
44 row: 42 SBN
45 row: 42 SBN
Sew the upper and lower parts of the beak, make sure that the marker we placed on the hole for the neck frame was at the bottom
BOTTOM
TOP
A little head stuff filled.
Tail-tail ***
1 row: into the ring am.5SBN (5)
2 row: (pr) x 5 times (10)
3 row: (pr, 1SBN) x 5 times (15)
4 row: (pr, 2SBN) x 5 times (20)
5 row: (pr, 3SBN) x 5 times (25)
6-13 series: 25 SBN (25)
14 row: (3СБН, уб) х5раз
Fill and sew a jug.
SHEET -2 pcs. ***
1 row: into the ring ami. 5CHN (5)
2 row: (pr) x 5 times (10)
3 row: (pr, 1SBN) x 5 times (15)
4 row: (pr, 2SBN) x 5 times (20)
5 row: (pr, 3SBN) x 5 times (25)
6-11 series: 25 SBN (25)
Take three pieces of wire from me 55sm.kazhdy (that is, three pieces of 55 cm)
Pass the wire through the trunk,
and thrust into the lower leg from the inside,
fill a little with filler and sew a shank, in the end donabit denser filler.
Wing-2pcs ***
The base of the wing ***
1 row: 28VP 2nd row: from the second from the loop hook: 26SBN, 3SBN, 26sbn on the other side of the chain, VP (= 55)
turn,
3 row: 11СБН, пр, 11СБН, уб, 1СБН, (пр) Х3 times, on the other side of the chain, 1СБН, уб, 11СБН, пр, 11СБН, VP (58)
turn
4 ranks: behind the back of the line: 11 RLS, pr, 11 RN, ub, 1 RNS, (1СБН, пр) Х3 times, 1СБН, уб, 11 СБН, пр, 11 СБН (61)
Collapse the detail with the long side in half (where we knit by the rear p / n, this side should be inside), tie the sb for both sides of the part. We cut off the wire for the skeleton of the wings. Pass the wire through the body
FEATHERS
Cut off a fairly long thread of the Chanterelle yarn, and begin sewing (making just loops), with shorter feathers, and increasing the length of the loins to the heaven ... At the ends of the wire (which we have inserted in the body, in place of the wings), make a loop to tightly the wire entered the base of the wing.
Sew the wings to the calf.
Paws wrap round with red thread, pre-spread the glue on the wire, the knee area is wrapped several times in one place, at the end the wire is divided into three claws ... and clamps each separately.
Make a forelock on the head, and add a few strings to the tail. Glue eyes, beads or make with plastic.
I did it out of plastic, rolled two identical balls and stuck a half-bug on top, baked it in the oven. Then glue the eyes. In the beak to stick the frog, press the fore-feet to squeeze the neck of the heron .... op ... everything is ready!
FROG
FRONT SHAFT-2pcs
We knit first balls-6 pieces.
1 row: 6 CBN in the ring ami.
2 row: pr x 6 times (12)
3rd row: 12 sc (12)
4 row: ybx6raz (6)
then we knit just around -30СБН.
Having connected 2 balls of a thread to cut off and harbor, from the third ball
DO NOT CUT OUT !!!, and continue to knit, connecting the balls ...
5 rows: 1 SBN for one ball, 1 SBN for the second, 1 SBN for the third, insert the wire frame, twist the wire,
further on the other side, 1СБН on one ball, 1СБН on the second and 1СБН on the third (6)
DEPRESS- 4days = 6SBN
Continue to knit in a circle.
10 series: (2 sc, pr) x 3 times (9)
11-32pages: 9CBN (9)
Adjustments to the end
Leave the thread for sewing.
REAR SHAFT-2pcs
We knit the balls -6pcs.
1 row: 6 CBN in the ring ami.
2 row: pr x 6 times (12)
3rd row: 12 sc (12)
4 row: ybx6raz (6)
then we knit just around -30СБН.
Having connected 2 balls of a thread to cut off and harbor, from the third
DO NOT CUT, but continue to knit, connecting the balls:
5 series: 1 SBN on one ball, 1 SBN on the second, 1SBN on the third, on the other side ,! RVS one by one, 1 SBN for the second and 1 SBN for the third (6)
Insert the wire frame.
DEPRECI-4Request = 6SBN
Continue to knit in a circle.
10 series: pr, 3SBN, pr, 1SBN = 8 sbn.
11 row: 8 sc.
12th row: (1 sc, pr) x 4 times (12)
13-21: 12SBN (12)
22 row: (1 sc, уб) х 4 times (8)
Row: 8СБН
24 row: (1 sc, pr) x 4 times (12)
25-32:
Leave the thread for sewing.
BODY
1 row: 6 sc in the ring ami.
2 row: prx 6 times (12)
3rd row: (1 sc, pr) x 6 times (18)
4-5: 18SBN
6 row: pr, 2SBN, pr, pr, 3SBN, pr, pr., 2SBN, pr, pr, 3SBN, pr (26) (abdomen)
7-8Reads: 26SBN
9 row: 6SBN, pr, 12SBN, pr, 6SBN
10-11: 28SBN (28)
12 row: 6SBN, pr, 14SBN, pr, 6SBN
Row: 7СБН, пр, 14СБН, пр, 7СБН
14 row: 8 SBN, pr, 14, pr, 8SBN
15-16: 34
Season: 10СБН, 2уб, 6СБН, 2уб, 10СБН
18: 11СБН, уб, 6СБН, уб, 9СБН
Row: 13СБН, уб, 4СБН, уб, 7СБН
20 series: 14СБН, уб, 2СБН, уб, 6СБН
21 row: 24 СБН
22 row: (2СБН, уб) х6раз
23-24draws: 18SBN
25 row: (1СБН, уб) х6раз
Row: 12СБН
27: decreasing until the end
Sew the front paws and the back, glue the eyes.
Embroider on the back stitches speckles, embroider sponges.
The toy was shrouded, the folds and the area around the eyes and cheeks tinted with black pastel, the neck-dark brown.
NOTE: you can change the color of herons ... categorically white.