jacket perfect for cool summer evenings

Click For Crochet Abbreviations List

knitted lace jacket with a shawl collar Eva Luna consists of several lace patterns. 


XS / S - M - L - XL - XXL - XXXL 

550-600-650-700-750-850 gr. Gray - purple (100% wool, 50g / 100m). 
Straight and circular knitting needles (80 cm.) No. 4. 
Knitting density: 
21 loops * 28 rows of stocking knitting = 10 * 10 cm. 
6 silver buttons. 

Shawl knitting (back / forward): 
The entire row is front. 1 hem = 2 rows of face loops. 

loops Close the button loops in the right side button loop. One hole = three front loops knit together and the fourth loop from the middle of the front, then make one nakid.

Close the buttonhole loops at the following intervals: 
Size XS / S: 6, 13, 20, 27, 34 and 40 cm. 
Size M: 6, 13, 20, 27, 34 and 41 cm. 
Size L: 6, 14 , 21, 28, 35 and 42 cm. 
Size XL: 6, 14, 22, 29, 36 and 43 cm. 
Size XXL: 6, 14, 22, 30, 37 and 44 cm. 
Size XXXL: 6, 14, 22 , 30, 38 and 45 cm. 

See schemes from A1 to A4. The diagram shows the drawing from the face. 

Council to reduce the loop (for example for the neck): 

Cut from the inside all the loops knitted with garter stitch, i.e. loop strap for collar. 
In the same way, cut the left side, in front of all the loops in the garter knit: knit two facial loops together.
Continue to cut and on the right side, after all the garter stitch loops: remove the un-tied loop as facial, 1 facial, psso. 

Knitting the main fabric of the jacket with knitting needles 
Knitting on circular needles back and forth, starting from the middle of the front shelf of the jacket. 
Freely dial 211-231-251-281-311-341 hinges (including five hinges for the slat in the direction of the center beam) on the # 4 circular knitting needle. Knit the first row as follows (= wrong side): knit 5 front loops, 2 face loops knit together, * 7 face loops, remove the loop unleashed as a face loop, knit two face loops together, lay the removed loop on the knit loop, repeat from * to * until there are 14 loops left on the spoke, 7 face loops, cross 2 face loops, 5 face loops = 171-187-203-227-251-275 loops.

Knit 2 rows of facial loops on top of all loops. Then enter two markers into the canvas, counting 45-49-53-59-65-71 loops on each side (= 81-89-97-109-121-133 loops between the markers on each side for the back). Continue knitting as follows: tie 5 loops of the garter stitch knit (see explanation above), knit according to pattern A-1: ​​pattern a over fourth loop, pattern b over 152-168-184-208-232-256 loops and pattern c over the fifth loop in garter knit, then 5 loops of the garter strap. Knit A-1 once, at the same time, when the size of the knitted jacket will be 6 cm., Start to close the buttonhole loop for buttons - see explanation above. 


Continue knitting according to the pattern A-2 in the same way (the bar is knitted with a garter stitch all the time), repeat the vertical knitting three times according to the pattern A-2. Then continue knitting according to the pattern A-3, at the same time in the first row, make a uniform reduction 12-12-12-8-8-8 loops (cut 6-6-6-4-4-4 loops from the back and 3-3 -3-2-2-2 loops from each shelf of the jacket, in any case not to make cuts above the slats) = 159-175-191-219-243-267 loops, also cut evenly 12-12-12-8-8 -8 loops in the last row in scheme A-3, make a distribution of the cuts as well as the previous reduction = 147-163-179-211-235-259 loops.

When one rapport will be vertically knitted under the scheme A-3, one rapport will be crocheted under the scheme A-4. When rapport will be knitted according to A-4 pattern, the size of the jacket's web will be approximately 32 cm. Continue knitting according to A-3 pattern at the same time evenly add 16 loops to the first row (8 loops on the back of the back 4 loops from the main web) = = 163-179-195-227-251-275 loops. In the same way, make additions to the last row according to the scheme A-3 = 179-195-211-243-267-291 loops. When you finish knitting according to A-3, continue according to A-2 (start adding for the collar before it is connected by A-2 - read the explanation further). 
Knitting shawl collar with knitting needles

At the same time, when the size of the knitted fabric will be 39-40-41-42-43-44 cm., Start adding loops for the collar on both sides to the center of the main fabric. Add loops by adding nakida between the most distant loops on both sides - in the next row, cross the nakida and front loops so that there are no large holes between the loops. 

Continue to add loops in each row until 15-15-15-18-18-18 loops are added on both sides of the connected, i.e. there should be 20-20-20-23-23-23 hinge loops on both sides.

Continue to knit the pattern of A-2 until the size of the canvas will be 41-42-43-44-45-46 cm. Next, knit the following first row of the pattern A-3 as follows: add for the collar and knit the bar as before , cut one loop for the neck - look at the advice to cut, knit until 2-3-3-4-4-5 loops remain before the marker, close 4-6-6-8-8-10 loops for the armhole , continue to knit until 2-3-3-4-4-5 loops remain before the next marker, close 4-6-6-8-8-10 loops for the armhole, knit, until two loops remain until the bar, cut one I look for a necklace - see a hint for cutting loops, knit a strap and add loops for the collar, as before. Complete each part separately. 
The left side of the front shelf of the jacket with needles

First read before starting the next part of the knitting: 
Pattern: continue to knit according to pattern A-3 until 1 rapport is knitted vertically, then knit using the pattern A-4 1 time (knit so that the loops you knit do not coincide with the loops neck, while loops for a neck in a piece of stocking stitching), then knit once according to scheme A-3 and continue stocking until you finish to the appropriate size - at the same time knit a garter stitch one edge loop in the direction of the armhole. 
Knitting an armhole 

At the same time, close the loop for the armhole at the beginning of each row on both sides of the loop as follows: 2 loops 0-0-0-2-3-4 times and then 1 loop 0-0-2-3-5-6 times. 

Knitting the collar and neck of the jacket with knitting needles

Continue to increase the loops for the collar, repeat the reduction of the loops for the neck in each row four times and then in every fourth row 5-5-6-6-7-7 times. After adding loops for the collar and cutting the loops for the neck, you should have 50-53-54-59-60-62 loops on the knitting needle.

When the size of the canvas will be 60-62-64-66-68-70 cm., Close the first 30-33-34-36-37-39 loops on the front side for the shoulder, knit the remaining row (= 20-20-20- 23-23-23 hinges will remain for the gate). Knit continue with knitting: * 2 rows only over the outermost loops 15-15-15-18-18-18 (towards the center of the main blade), 2 rows over all loops *, repeat from * to * until approximately the size of the collar equal to 5½-5½-6-6-6½-6½ cm. along the short side (by doing so duplicate the same dimensions on the outside), remove the loops on the pin. 
The right front shelf of the jacket 

Knits, like the left part, only mirrored. When you close the loop for the shoulder, knit on the wrong side to avoid thread breaks when knitting the collar. 
Knitting the back of a jacket

= 81-87-95-109-121-131 loops. Close the armhole on each side, as with the front shelf = 81-87-91-95-99-103 loops. At the same time, finish knitting according to A-3 pattern with the most distant loops on each side in a garter stitch, continue knitting according to A-4 pattern, knit vertically once (look at the arrow shown on the outside of the pattern - the middle of the back, knit loops with each side, so that the loops do not match the pattern when hosiery knitting). 

Then knit rapport under the scheme A-3 before the end of knitting stocking knitting

When the size of the canvas will be 58-60-62-64-66-68 cm., Close the average 19-19-21-21-23-23 loop for the neck, then knit the shoulders separately. Close one loop in the next row for the neck = 30-33-34-36-37-39 loops will remain for each shoulder. Close all the loops, when the size of the canvas will be 60-62-64-66-68-70 cm. 
Knitting a jacket sleeve 

Knit it with needles back and forth.

Freely type 63-63-63-73-73-73 loops (including one edge on each side) with the spokes # 4. Knit the first row as follows (purl row): 1 knit the front one, 2 knit the front loops, 7 knit the front loops, remove the 1 loop as a face loop, knit two facial loops together, throw the loop that was removed on the knit *, repeat from * until * until the needle will have 10 loops, tie 7 face loops, cross 2 subsequent face loops together, 1 face loop = 51-51-51-59-59-59 loops. Knit two facial rows over all loops. Continue to knit in the following way (single row = front row): one edge loop in garter knitting, knit according to pattern A-1 in this way: pattern a over 4 loops, pattern b over 40-40-40-48-48-48 loops and scheme with over 5 loops, complete the edge loop with a garter stitch. Once crochet vertically in a pattern A-1.

Before continuing knitting read the entire section! 

Pattern: continue to knit according to A-2, you need to knit vertically four rapport upwards, then continue to knit according to A-3 pattern, knit once, vertically knit according to A-4 pattern once (calculate the loops so that the loop marked on arrow, was in the middle of the sleeve), knit once according to the scheme A-3 and then according to the scheme A-2 until you tie to the required length. 

Increase: Knit the same way when the size of the canvas was 12-12-14-14-16-16 cm., Add one loop on both sides. Repeat the addition every 4½-3½-2½-2½-2-1½ cm 8-10-12-11-14-17 times = 69-73-77-83-89-95 loops - continue knitting with the addition of stocking stitches, like this corresponds to rapport. 
Knit head sleeves

When the size of the connected leaf of the sleeve is 50-49-48-47-46-45 cm (for larger sizes, a shorter arm is taken, in the case of a long sleeve it greatly expands the shoulders), close the loops on both sides at the beginning of each row sides of the sleeve: close 4 loops once, then 2 loops on both sides to the appropriate length of 55 cm for all sizes (be sure that the pattern did not move when you closed the loops, knit the loops that did not match the stocking ), as a result, close each loop three loops once before by how to close the remaining hinges. 

The size of the knitted fabric will be approximately 56 cm. In all sizes. 
Jacket assembly

Sew shoulder seams. Sew the back seam on the collar, stitching it to the back of the jacket. Sew the bottom seams of the sleeves. Sew on buttons

Post your comment

Information!  You need to be a member to comment. You can easily sign up from here.