Summer knitted top is decorated with loose openwork detail. On the back there is a strip of openwork drawing.
Yarn Quince & Co. Sparrow (100% лен; 154 m/50 grams in a Skein) – 5 (5, 6, 7, 7, 8) Motks.
Spokes № 3.25 and № 3.5, circular spokes № 3.25 length 40 cm, loop markers, tapestry needle.
The front and back of the top are knit separately and then sewn together. The top openwork detail is knitted separately and joins one lateral party to lateral shvu, the second party remains free.
1st Installation Circular Series: * 1 front hinge, 1 loop to remove as wrong, thread before loop; Repeat from * to the end of the series.
2nd Installation Circular Series: * 1 loop to remove as wrong, thread by loop, 1 purl loop; Repeat from * to the end of the series.
Cut off the thread, leaving the end length of 183 (183, 205, 228, 228, 252) see.
1st step: Put the end of the thread in the tapestry needle, insert the needle in the first loop as when knitting reverse loops and stretch the thread, reset the loop with the spokes.
2nd step: Insert the needle into the next wrong needle (the first on the spoke) as when knitting the front hinge and stretch the thread, leave the loop on the spokes.
3rd step: Insert the needle in the removed with the spokes loop as when knitting the front loop, then the next face loop (the second loop on the spokes) as when knitting reverse loops, stretch the thread.
4th step: Insert the needle into the wrong loop on the spokes as when knitting the reverse loop and stretch the thread.
Repeat steps 2-5 until 1 loop is left, Finish step 2. Insert the needle in the removed with the spokes face loop as when knitting the front hinge, then in the wrong loop on the spokes as when knitting reverse loops. Remove the loop from the spokes.
Front part:
Spokes № 3.25 Dial 94 (98, 110, 120, 132, 142) loops.
Next row (front): 1 face loop, * 1 facial loop, 1 purl loop; Repeat from * to the last loop, 1 facial loop.
Tie 2.5 cm Rubber Band 1 x 1, having the extreme loops on both sides of the handkerchief, finish the facial near.
Change the spokes to № 3.5.
A number of additions (seamy): 1 obverse loop, Purls loops up to the last loop, having added evenly 2 (4, 4, 5, 5, 6) loops, 1 obverse loop – on Spokes 96 (102, 114, 125, 137, 148) loops.
Link up to the height of 30.5 (31, 31.5, 31.5, 31, 31.5) cm front surface of the inlaid series, having the extreme loops on both sides of the handkerchief, finish the iznanochnym near.
Forming of Armholes:
Close on 6 (6, 7, 9, 12, 12) loops at the beginning of the next 2 rows, then on 4 (4, 6, 6, 7, 9) loops at the beginning of the next 2 rows – on the Spokes 76 (82, 88, 95, 99, 106) loops.
A number of tabs (obverse): 3 face loops, 2 loops to touch together a front with a slope to the right, to knit in the established order up to the last 5 loops, 2 loops to touch together a front with a slope to the left, 3 obverse loops-have been cut down 2 loops.
Repeat a number of decrease in each lyceum number of 4 (6, 7, 9, 11, 13) times-on the Spokes 66 (68, 72, 75, 75, 78) loops.
Knit further straight until the height of the armrow reaches 14 (15, 16, 16.5, 18, 18) cm, finish iznanochnym next.
Forming of neck Cut:
The next row (front): 21 (21, 22, 23, 23, 24) face loop, attach the thread from another ball, close the following 24 (26, 28, 29, 29, 30) loops, facial loops to the end of the series-for each side left on 21 (21, 22, 23, 23, 24) loops.
Tie each side of the neck cut separately. Close 5 loops on the side of the neck cut at a time, then another 3 loops – on each side there are 13 (13, 14, 15, 15, 16) loops left.
Link 1 seamy series.
A number of tabs (obverse): Face loops up to 4 loops before a cut of a neck, 2 loops to touch together a front with a slope to the left, 2 obverse loops; 2 facial loops, 2 loops to touch together the front with a tilt to the right, facial loops to the end of a series-from each edge is cut down on 1 loop.
Repeat these decrease in each lyceum number of 1 (1, 2, 3, 3, 4) times-on each side there are 11 loops. Close all loops.
Back:
Spokes № 3.25 Dial 94 (98, 110, 120, 132, 142) loops.
Next row (front): 1 face loop, * 1 facial loop, 1 purl loop; Repeat from * to the last loop, 1 facial loop.
Tie 2.5 cm Rubber Band 1 x 1, having the extreme loops on both sides of the handkerchief, finish the facial near.
Change the spokes to № 3.5.
Number of seamy: 1 facial loop, 0 (5, 5, 5, 4, 5) purl loops, [2 loops touch together reverse, 7 (4, 6, 5, 4, 6) Purl loops] – 10 (14, 12, 15, 20, 16) times, 2 loops touch together reverse, 0 (5, 5, 5, 4, 5) Purl loops , 1 front hinge – on the spokes 83 (83, 97, 104, 111, 125) loops.
To link 8 times rows of 1-4 the Raport of openwork drawing on a scheme, then to link once the 1st row.
The next row (seamy): 1 front hinge, Purls loops to the last loop, 1 front hinge.
Number of additions (front): 5 (5, 8, 2, 5, 7) face loops, [1 loop to add from a stretch, 6 (4, 5, 5, 4, 5) – 12 (18, 16, 20, 25, 22) times, 1 loop to add from a stretch, 6 (6, 9, 2, 6, 8) of obverse loops – on Spokes 96 (102 , 114, 125, 137, 148) loops.
Link up to the height of 30.5 (31, 31.5, 31.5, 31, 31.5) cm front surface of the inlaid series, having the extreme loops on both sides of the handkerchief, finish the iznanochnym near.
Forming of Armholes:
Close on 6 (6, 7, 9, 12, 12) loops at the beginning of the next 2 rows, then on 4 (4, 6, 6, 7, 9) loops at the beginning of the next 2 rows – on the Spokes 76 (82, 88, 95, 99, 106) loops.
A number of tabs (obverse): 3 face loops, 2 loops to touch together a front with a slope to the right, to knit in the established order up to the last 5 loops, 2 loops to touch together a front with a slope to the left, 3 obverse loops-have been cut down 2 loops.
Repeat a number of decrease in each lyceum number of 4 (6, 7, 9, 11, 13) times-on the Spokes 66 (68, 72, 75, 75, 78) loops.
Knit further straight until the height of the armrow reaches 10 (11.5, 18, 19, 20.5, 21) cm, Finish iznanochnym next.
Forming of neck Cut:
The next row (front): 13 face loops, attach a thread from another ball, close the next 40 (42, 46, 49, 49, 52) loops, facial loops to the end of the series-on the spokes of 13 loops on each side.
Finish each side of the neck cut separately.
Link 1 seamy series.
A number of tabs (obverse): Face loops up to 4 loops before a cut of a neck, 2 loops to touch together a front with a slope to the left, 2 obverse loops; 2 facial loops, 2 loops to touch together the front with a tilt to the right, facial loops to the end of a series-from each edge is cut down on 1 loop.
Link 1 seamy series.
Repeat a number of decrease-on each side there are 11 loops. Close all loops.
Openwork Top Detail:
Spokes № 3.5 Dial 82 (86, 93, 101, 107, 114) loops.
Tie 2 cm of the handkerchief, finish the facial side.
Number of Seamy: 5 (7, 3, 4, 3, 3) facial loops, [2 loops to touch together the front with a tilt to the right, 5 (3, 4, 4, 5, 3) Facial loops] – 10 (14, 14, 15, 14, 21) times, 2 loops to touch together the front with a tilt right, 5 (7, 4, 5 , 4, 4) facial loops – on the Spokes 71 (71, 78, 85, 92, 92) loop.
The next row (front): 1 loop to remove as wrong, thread before the loop, 1 purl loop, openwork pattern to the end of the series.
Next row (seamy): Openwork drawing up to 2 last loops, 1 purl loop, 1 obverse loop.
Continue to knit in the established order to the height of 25.5 (26.5, 28, 29, 30, 31) cm from the inlaid row, finish the facial side.
Forming of Armholes:
At the beginning of the next Iznanochnogo series Close 5 (5, 6, 7, 10, 10) loops, then at the beginning of the next Iznanochnogo series Close 4 (4, 5, 5, 6, 7) loops – on the Spokes 62 (62, 67, 73, 76, 75) loops.
A number of tabs (obverse): Openwork drawing up to the last 3 loops, 2 loops to touch together a front with a slope to the left, 1 obverse loop-is Uavlena 1 loop.
Repeat these decrease in each lyceum number of 4 (4, 5, 8, 8, 9) loops – on the spokes of 57 (57, 61, 64, 67, 65) loops.
Knit further straight until the height of the armrow reaches 14 (15, 16, 16.5, 18, 18) cm, finish iznanochnym next.
Forming of neck Cut:
The next row (obverse): 18 (18, 19, 20, 21, 20) loops of openwork drawing, to attach a thread from another ball, to close the following 21 (21, 23, 24, 25, 25) loop, loops of openwork drawing to the end of a series – for each party there are left on 18 (18, 19, 20, 21, 20)
Tie each side of the neck cut separately. Close 4 loops on the side of the neck cut at a time, then another 2 (3, 3, 3, 3, 2) loops – on each side there are 12 (11, 12, 13, 14, 14) loops left.
Link 1 seamy series.
A number of tabs (obverse): Loops of openwork drawing up to 2 loops before a cut of a neck, 2 loops to touch together a front with a slope to the left; 2 loops to touch together the front with a tilt to the right, loops of openwork drawing to the end of a series-from each edge is cut down on 1 loop.
Repeat these decrease in each lyceum number of 1 (1, 1, 2, 2, 3) times – on each side there are 10 (9, 10, 10, 11, 10) loops left. Close all loops.
End:
Fill the ends of the threads. Steam the parts. Attach the openwork part to the front side of the face upwards. Holding these two parts together, perform a side seam, starting from the right armholes. When the openwork part is finished, connect only the backrest and the front part. Thus, this seam to connect three parts: the back of the front part and the upper openwork detail.
Run the left side seam by performing the backrest and the front part.
Perform shoulder seams by connecting the backrest, the front part and the Openwork top part.
Right arm harness:
Spokes № 3.25 and on the front side, holding together the front part and the top openwork detail, dial and touch the obverse 94 (100, 112, 120, 134, 140) loops on the edge of the armhole. Place the marker and connect the loops in a circular series.
Tie 3 Circular Rubber Bands 1 x 1 (1 front hinge, 1 purl loop). Close all loops.
Left arm strapping:
Spokes № 3.25 and on the front side to dial and touch the obverse 94 (100, 112, 120, 134, 140) loops on the edge of the armhole, without capturing the openwork detail. Place the marker and connect the loops in a circular series.
Neck Cut:
Spokes № 3.25 and on the front side, holding together the front part and the upper openwork detail, dial and touch the facial, starting from the left shoulder seam, dial and Projazit facial 56 (58, 62, 62, 64, 64) loops along the neckline of the front of the neck, then 50 (54, 56, 58, 60, 60) loops along the neckline of the backrest-on the spokes of only 106 (112, 118, 120, 124, 124) loops. Place the marker and connect the loops in a circular series.
Starting with the front hinge, tie 3 circular rubber bands 1 x 1. Close all loops with a double hollow strap.