Helena

Toy hare crochet amigurumi

Click For Crochet Abbreviations List

Knit like - share in the comments 

Initially, the idea was to tie a hare- amigurumi , but since amigurumi are more modest in size (my hare turned out to be 15 cm tall), the toy can be classified as ordinary crocheted. 

I always liked the design of a combination of yarn and other materials, for example, conventional fabric. In the case of the bunny, there is just an excellent opportunity to place any fabric you like on the ears and legs. 

To create a hare, I took “Scarce” yarn (it took a little more than half of the skein), woolen threads for embroidery, hooks №1.4 and №1, rags of the calico you liked (found in bags with scraps of fabrics :) and padding for filling. 
The figure of the hare consists of a fused head and torso, ears, legs, arms, and a small tail. Height is 15 cm. Knit “From the head”. 

Description of the toy: 
Getting started with the head-head (hook No. 1.4): 
1 row: 6 sbn in the amigurumi ring 
2 row: 6 gains (12) 
3 row: * 1 sbn pr * 6 times (18)
4 row: * 2 Sat pr * 6 times (24) 
5 row: * 3 Sat pr * 6 times (30) 
6 row: * 4 sat pr * 6 times (36) 
row 7: * 5 Sat pr * 6 times ( 42) 
8-14 rows: 42 sat in each row 
15 row: 15 sat 6 kills 15 sat (36) 
16 row: * 4 buns u * 6 times (30) 
17 row: * 3 buns u * 6 times (24) 
18 row: * 2 sbn ub * 6 times (18) - fill the body with 
padding polyester 19 row: * 1 sbn ub * 6 times (12) 
20 row: 12 ave (24) 
21 row: * 3 sbn pr * 6 times (30 ) 
22 row: * 4 sab pr * 6 times (36) 
23 row: * 5 sb pr * 6 times (42) 
24 row: * 6 sb pr * 6 times (48) 
25 row: * 7 sb pr * 6 times (54) 
26-32 rows: 54 UBN in each row 
33 row: 17 UBN 4 kill 6 UBN 4 kill 17 UbN (48) 
34 row: 48 UbN 
35 row: * 6 Ubc * 6 times (42)
36 row: * 5 UBK kill * 6 times (36) 
37 row: * 4 UBB kill * 6 times (30) 
38 row: * 3 Ubc kill * 6 times (24) 
39 row: * 2 Bunch kill * 6 times ( 18) - fill the head with a 
padding polyester 40 row: * 1 ub ub * 6 times (12) 
41 row: 6 down to close the knitting 

Cut the thread, leaving a long tip for forming the face: 
enter the needle in the 33 rows (where the first downpads started) , in the center, we make a vertical utyazhka about 7-8 rows, fasten the thread. 

Getting to the ears (knit in a circle, in the amount of two pieces): 
1 row: 6 sbn in the ring amigurumi
2 row: 6 increments (12) 
3 row: * 1 sbn pr * 6 times (18) 
4 row: * 2 sabn pr * 6 times (24) 
5th row: * 3 UBN * 6 times (30) 
6–10 rows: 30 UBN in each row
11th row: * 3 Sat ub * 6 times (24) 
12-14 rows: 24 Ubc in each row 
15 row: * 2 ub * 6 times (18) 
16-18 rows: 18 sat 
19 row: * 1 ub * 6 times (12) 
20-21 rows: 12 sbn we 
cut the thread, leaving a long tip for sewing. The 

ears fold in half, they will not have a flat shape, rather concave, choose the fabric you like, cut out the workpiece according to the shape of the ears and sew in any convenient way ( any hand-stitched seam). 

We knit legs: we collect 
8 air loops 
1 row: 6 sbn to the second from the hook loop, 3 sbn to the outermost loop, 5 sbn, 1 pr (16) 
2 row: 1 pr, 5 sbn, 1 pr, 1 sbn, 1 pr, 6 sbn, 1 pr (20) 
3 row: 1 sbn, 1 pr, 6 sbn, 1 pr, 1 sbn, 1 pr, 7 sbn, 1 pr, 1 sbn (24)
4 row: 1 sbn, 1 pr, 7 sbn, 1 pr, 3 sbn, 1 pr, 8 sbn, 1 pr, 1 sbn (28) 
5 row: 28 sbn for the back walls of the loops of the previous row 
6 row: 11 sbn, 1 ass, 2 sbn, 1 ass, 11 sbn (26) 
7 row: 10 sbn, 1 slab, 2 sbn, 1 slab, 10 sbn (24) 
8 row: 8 sbn, 1 slab, 1 sbn, 1 slab, 1 sbn , 1, 8, 8 ( 
9 ) 9: 6, 1, 1, 1, 1, 1, 1, 7 (18) 
10-14 rows: 18 in each row, after 14 rows leg with 
padding polyester 15 row: * 1 ub ub * 6 times (12) 
16 row: 6 increments, close knitting, leave the thread for sewing 
Legs are knitted in double. Cut out oval blanks from the fabric and sew them to the feet. 

Getting down to the handles: 
1 row: 6 sbn in the ring amigurumi
2 row: 6 increments (12)
3 row: * 1 UBN * 6 times (18) 
4-6 rows: 18 UBN in each row 
7 row: 1 kill 1 UBN 1 kill 1 UBN 1 kill 1 UBN 1 kill 7 UBN (14) 
8-11 rows: 14 sbn in each row 
12 row: * 1 kill 5 sbn * 2 times (12) - fill the foot with 
padding polyester 13 row: 6 decrease, close the knitting, leave the thread for sewing. 
Like the legs, the handles knit in the amount of two pieces, for them we also cut out a blank from a cloth, only already round in shape. 

We collect our hare together. I did not sew the legs and arms of what is called “tightly”, but pulled them together in the manner of an ordinary baby doll, when the arms and legs can rise and fall, so the bunny can stand and sit. 

We take the tail.
I wrapped a small amount of yarn on two fingers, then pulled off the formed skein in the middle and cut the resulting “eight” around the edges (if necessary, the tail can be trimmed), fluffed it and sewed it to the hare. 

After the bunny is assembled, take up the muzzle. To create my eyes I used to take woolen threads for embroidery and a hook №1. Knitting follows: 
1 row 6 sc in ring amigurumi (this pupil, it can be of any color) 
2 series (white thread) 1 connecting bar (ss) 1 sc 1 CLO 1 sc in one loop 1 cc 
Spout embroidered any thread, add the edge, mouth and mustache (you can without them). 
Total: we get an unusual hare who can be presented to a dear and close person :) 

Source





























Post your comment

Information!  You need to be a member to comment. You can easily sign up from here.

0 comments