Annie

JACQUARD SET FOR THE BABY

Click For Crochet Abbreviations List

Knit. Jumpsuit, hat and mittens with jacquard patterns. Sizes 62-68 (74-80) 86-92 Size: on growth 62-68 (74-80) 86-92. 

You will need: Yarn (100% wool; 120 m / 50 g) - 200 (250) 300 g of green and 150 (200) 200 g of white; 

for jumpsuit: 6 white-green buttons; Needles number 3.5; short circular needles number 3.5; set of stocking needles number 3.5; hook number 3.  

Facial surface: front rows - front loops, purl rows - purl loops; in circular rows, all the knit loops are facial. 

Wrong surface: front rows - loop loops, purl rows - face loops; in circular rows, all the loops are knitted in purses. 

Gum: alternately 2 loops on the front surface, 2 loops on the back side.

Jacquard pattern on 16 loops: knit according to the pattern with the front satin stitch in two colors, while the non-working thread is constantly free to stretch along the seamy side of the work so that the knitted fabric does not tighten. 

Start with the loops from the corresponding arrow, repeat the repeat and finish according to the pattern. According to the instructions constantly repeat rapport 1 or rapport 2.  

Knitting density: jacquard pattern - 24 p. X 26 p. = 10 x 10 cm. 

Overalls 

Right rear and left front details of the trousers: type 30 (34) 38 loops on the spokes with a green thread and tie 2 cm with an elastic band, adding 2 (1) 0 p. In the last row. Starting from arrow A (B) C, knit between the edge jacquard pattern, while constantly repeating rapport 1. 

At the same time from the gum add for stepping bevels on both sides according to the pattern in each 6th p. 6 (7) 8 x 1 p. After 15 (18) 21 cm from the gum, leave all the loops. 

The left rear and right front trouser parts: knit as well, but to begin with jacquard pattern arrow D (B) E.  

Back: loop left and right rear trouser parts to move one needle and continue to knit jacquard pattern in all loops between the edge when This is constantly repeat rapport 2 and in the 1st p. knit together the front two edge workings formed in the center = 87 (97) 107 p.

After 35 (41) 47 cm from the elastic close for armholes on both sides 1 x 14 p. At the height of proym 12 (14) 16 cm close the neck averages 17 (21) 25 p. Finish each side separately, along the edge of the neck close in every 2nd p. 1 x 3 p. And 1 x 1 p. After 14 (16) 18 cm from the beginning of the armhole, close the remaining shoulder loops. 

Front: knit just like the back, but with a slit for the slat and a deeper neck. 

To do this, after 19 (23) 27 cm from the gum, close the middle 5 points and finish both sides separately. At the height of the back and in the same way on the outer edge to perform armholes. 

At the height of the armhole 7 (9) 11 cm, close for the neck along the inner edge 1 x 5 (7) 9 p., Then in each 2nd p. 1 x 2 p. And 1 x 1 p. And at the end in each 4th p. close 2 x 1 n. At the height of the back close the remaining shoulder loops. 

Sleeve: dial the spokes green thread for each sleeve 38 (42) 46 loop and tie 2 cm rubber, adding uniformly in the last row 1 (3) 3 n.  

Next knit jacquard pattern between the edge, beginning at the arrow F (G) E , while constantly repeating rapport 1.  

At the same time, from the gum, add for bevels according to the pattern on both sides in each 4th p. 3 (4) 6 x 1 p., Then in each 2nd p. 11 (13) 13x1 p. Through 14 (17) 20 cm from the gum, knit right another 6 cm, then directly close all the loops. 

Assembly: slightly moisten the parts, stretch them according to the sizes indicated on the pattern, impale them on the pattern and leave to dry. 

Run shoulder seams. Sew the sleeves so that the middle of the sleeves coincides with the shoulder seam. Run side seams and sleeve seams as well as stepped seams. 

Tie the edges of the cut for the strap with a crocheted green thread 1 p. Art. b / n Capturing with a needle the outer wall of each st. b / n, dial with green thread on the spokes according to 56 (64) 72 p. and tie 2 cm with an elastic band, at the same time after 1 cm on the left bar (from the side of the wearer) to perform, evenly distributing in height, 5 holes for buttons - 2 p . Close and in the next row dial again.

All loops close. Sew on the lower, short edges of the slats, putting the left on the right. Crochet the neck, including the short edges of the slats, with a green thread, 1 p. Art. b / n 

Capturing the rear wall of each st. b / n, dial with green thread on the circular needles 76 (84) 92 p. and tie 2 cm with an elastic band, at the same time after 1 cm along the left edge over all the holes for the buttons to make another hole. 

All loops close. Sew buttons. At the end of all the seams slightly otparit. 

HATS WITH EARS  

Ears (2 parts): dial with green thread on the needles for each ear 3 loops and between the edge knit jacquard pattern, distributing the pattern starting from the middle of the part, and in each 2nd p. add according to pattern 4 x 1 p. Through 11 p. all loops leave. 

The main part of the cap: dial on circular knitting needles with a green thread 29 (37) 37 loops, knit 11 paragraphs of the first ear, then dial with a green thread 29 (37) 37 loops and knit 11 paragraphs of the second ear = 80 (96) 96 paragraph.  

Continue knit in circular rows with a jacquard pattern, at the same time start with the 13th row of the jacquard pattern and distribute the pattern so that the middle of the jacquard pattern indicated in the diagram falls along the middle of the front side. 

After 12 (17) 19 cm from the beginning of the circular knitting, distribute the loops to 4 stocking knitting needles = 20 (24) 24 points for each knitting needles and perform the decrements as follows: 1 + 3 knitting needles: knit all the loops except for the last 2 items, then last 2 pts knit together the front; 2 + 4 knitting needles: 2 sec. Knit with a slope to the left (= 1 remove the loop, 1 put the front loop and stretch the removed loop), then knit the remaining loops. 

To perform these reductions in each circle. until 4 pins remain on the needles. Tie these loops tightly with a working thread. 

Assembly: The entire bottom edge of the cap, including the ears, is tied with 1 crochet of green thread with a green thread. Art. b / n and 1 krug.r. "Parching step" (= Art. B / n knit in the direction from left to right).

From white yarn to make 3 brushes, each approx. 9 cm, and sew to the ears, as well as in the middle of the cap. 

VARIABLES Work 

description: type 24 loops with 28 green loops on the stocking needle (28) 28 loops, distribute the loops into 4 needles and knit in circular rows 4.5 cm with an elastic band, evenly distribute, add in the last circle, row 6 s. p.  

Continue to knit in circular rows with a jacquard pattern, spreading the loops as follows (the beginning of the circle, the row is on the side): 1 p. green thread, 13 (15) 15 p. jacquard pattern from arrow E (B) B, 2 p. green thread , 13 (15) 15 p. Jacquard pattern from arrow E (B) B, 1 p. Green thread. 

Rapport 1 is constantly repeated, while after 1 cm add for the thumb after the 1st loop and before the last loop a circle, rows of 1 p. Green thread. Repeat this increase in every 2nd round, a row of 1 (2) more 2 times. 6 (8) 8 p. Of the thumb leave and at the same place again, dial 2 p. And continue to knit in circular rows. 

After 4,5 (5,5) 6,5 cm from the elastic band, perform the decrements as follows: 1 + 3 knitting needles: 1 front, 2 points. Tie with a tilt to the left (= 1 remove the loop, 1 face and remove the loop) then knit the remaining stitches; 2 + 4 knitting needles: knit all the loops to the last 3 loops, then 2 p. Knit together the front and 1 front.

These reductions are repeated in each circle. until all needles have 6 p. The remaining hinges are firmly tied off with a working thread. The second mitten tie the same. 

Assembling: Spread the left 6 (8) 8 p. Of the thumb into 2 stocking knitting needles, additionally dial 4 (3) 4 p. With a green thread and knit 9 (10) 11 krug.r. facial smoothing. 

In the next round. permanently knit 2 points together with the front one, then firmly pull off the remaining hinges with the working thread. For the lace, tie a chain of air loops into 2 green threads of approx. 85 (90) 95 cm, attaching the thread to the elastic of the first mitten, using Comm. Art. attach the lace to the elastic of the second mitten, then tie the chain 1 p. Comm. Art. 

According to the materials of the magazine "Sabrina Baby", No. 4, 2015

Source





Post your comment

Information!  You need to be a member to comment. You can easily sign up from here.

0 comments